null Skip to main content
sE Electronics DM2 Active Inline Mic Preamp
sE Electronics DM2 Active Inline Mic Preamp
$149.00

sE Electronics DM2 Active Inline Mic Preamp

(No reviews yet)
SoundPro Item: 128391
MPN: DM2
  • Videos

  • sE Electronics DM2 Active Inline Mic Preamp
MSRP: $199.00
$149.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The DM2 TNT active inline mic preamp lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.

For optimum results, plug the DM2 directly into your microphone's output. If needed, a cable can be used between the microphone and the DM2: the shorter the cable the better the overall performance will be.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by a roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.

sE Electronics DM2 Features

  • Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
  • Designed for neutral, balanced sound quality with minimal noise
  • 8 settings ranging from 50 Ω to 10 MΩ to match your preamp with any mic accurately
  • Two gain levels for high flexibility on various sources
  • Boosts signal independent from load impedance or cable length
  • Enhance dynamic and passive ribbon microphones
  • Explosive gain and precise control
  • Precise control
  • Sophisticated Class A electronics
  • Gold plated XLR connector
  • All-metal housing with premium finish
  • Perfect for podcasting, recording, or live sound
  • DM2 TNT active inline mic preamp1
  • sE logo sticker1
  • User manual with warranty card1
  • System Requirements
    • Input: passive microphone (ribbon/dynamic)
    • Output: preamp/mixer/audio interface providing 48V phantom power
    • Limitations: not suitable for phantom-powered microphones (condenser mics, active ribbon mics)
  • Frequency Range10 Hz - 120,000 Hz (-0.3 dB)
  • Gain15 dB / 30 dB
  • Max Output Level (0.5% THD)9.5 dBV (3.0 V)
  • Output Noise Level1 μV @ 15 dB / 6.6 μV @ 30 dB
  • Powering48 Volts according to IEC 61938
  • Electrical Impedance135 Ω
  • Recommended Load Impedance>1kΩ
  • Current Consumption3.1 mA
  • Connectivity3-pin male/female XLR connector
  • Dimensions0.75" diameter x 3.76" length
  • Weight2.82 oz

In The Box

Videos Hide Videos Show Videos

Customer Reviews