The Attero Tech by QSC unD4I-L is a four-channel Dante/AES67 audio interface that allows for integration of analog mic/line sources into networked AV systems like the Q-SYS Ecosystem. It features four balanced mic/line inputs, each with eight software-selectable gain presets and +48 V phantom power.
The 4 x 4 logic I/O (GPIO) offers an easy interface with microphone switches and indicator LEDs. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The unD4I-L also has two network connections to allow for daisy-chaining of one additional unD4I-L, and can be powered by either external +24 V DC or any PoE network switch.
Attero Tech unD4I-L Dante/AES67 Features
- Four balanced and RF-filtered mic/line inputs on 3-pin depluggable connectors
- Software-selectable gain presets (per channel)
- PoE capable
- +48 V phantom power on each channel
- Four logic inputs (GPIO) accept dry contact closure, opto, or open collector inputs and can send UDP status messages to connected DSPs or control processors
- Four logic outputs (GPIO) with source/sink capability for LEDs
- unD4I-L Dante/AES67 Network Audio Interface1
- Mic/line input type Balanced and RF filtered
- Mic/line inputs 1-4
- Software-selectable gain presets
- Without pad: 0 dB, +15 dB, +30 dB, +45 dB
- With pad: -12 dB, +3 db, +18 dB, and +33 dB
- +48 V phantom power on each channel
- Software-selectable gain presets
- Mic/line input type Balanced and RF filtered
- Phantom power +48 V, software-selectable
- Mic/line gain Software-selectable presets: 0 dB, +15 dB, +30 dB, and +45 dB & 12 dB pad
- Maximum input levels
- +8 dBu @ 0 dB gain
- -7 dBu @ +15 dB gain
- -22 dBu @ +30 dB gain
- -37 dBu @ +45 dB gain without 12 dB pad.
- With 12 dB pad: maximum input levels are 12 dB higher
- PoE class 802.3af PoE compliant
- Dimensions (HxWxD) 1.5x8.3x4.7" (38.1x210.8x119.4 mm)
- Weight1.38 lbs (.63 kg)
