The ATND1061DAN Beamforming Ceiling Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state-of-the-art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061DAN is easy to install, set up, and operate. AEC Reference can be shared across the units via Dante.
The ATND1061DAN Beamforming Ceiling Array Microphone is a state-of-the-art, professional conferencing solution for meetings of any size – from boardrooms to classrooms. Capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. Each microphone supports a maximum of 6 simultaneous beams. One beam will cover Up to 16 Coverage Zones. Five simultaneous beams will cover Up to 16 Priority Zones. It also features unlimited exclusion zones.
Audio-Technica ATND1061DAN Features
- The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small
- Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ
- User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings
- Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types
- Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants
- Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations
- Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling
- Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)
- Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)
- Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount
- UL 2043 compliant for installation in plenum spaces
- Low-reflective white finish matches ceiling tiles in most environments
- Powered by network PoE
- ATND1061DAN Beamforming Ceiling Array Microphone1
- Tile bridge1
- Safety wiring1
- IR remote controller1
- Screw (M4 × 50 mm)4
- Flush mount adapter1
- Flush mount cover1
- Screw (M4 × 10 mm)12
- Hole cover1
- Nut4
- Snap bushing2
- Tile bridge A2
- Tile bridge B2
- Tile bridge C4
- Seismic cable1
- Zip tie1
- Safety belt1
- Euroblock connector3
- Installation template1
- Mounting hardware and accessories
- Five Year Limited End User Warranty1
- Microphone
- Beam Width: 90-degrees
- Polar Pattern: Beam pattern
- Frequency Response: 60 Hz to 18,000 Hz
- Maximum Input Sound Level: 102 dBSPL
- Sensitivity: -8 dBFS (1 kHz, 94 dBSPL)
- Dynamic Range: 89 dB (A-weighted)
- Signal-to-Noise Ratio: 61.5 dB (A-weighted)
- Self-Noise: 25 dBSPL (A-weighted)
- Analog Audio
- Frequency Response: 20 Hz to 20 kHz (+1.0/-2.0 dB)
- Dynamic Range: 100 dB (A-weighted)
- Signal to Noise Ratio: 80 dB (A-weighted)
- Headroom: 20 dB
- Residual Noise: -75.8 dBu (A-weighted)
- T.H.D: <0.1% (1 kHz, unity)
- Analog Input
- MIC Maximum: -30 dBu
- MIC Unity: -50 dBu
- LINE Maximum: +12.2 dBu
- LINE Unity: -10 dBV, Switchable
- Analog Output
- OUTPUT Maximum: +19.2 dBu
- OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable
- General Specifications - Beamforming Array
- Power Requirement: PoE (IEEE 802.3af Class 0)
- Power Consumption: Max. 7 W
- Operation Temperature Range: 0°C to 40°C (32°F to 104°F)
- Operation Humidity Range: 25% to 85% (Non condensing)
- Dimensions (W x D x H): 9 x 9x 1.2 inches (227.5 × 227.5 30 mm)
- Weight: 44 oz (1250 g)
- Network
- Dante: 1 Gbps
- IP control: 100 Mbps
- Digital Audio
- Sampling rate: 48 kHz
- Bit depth: 24 bit
- Latency
- Microphone (CH1 to CH6): 47 msec
- Microphone (Auto Mix CH): 79 msec
- Dante: Min. 250 usec, Max. 5 msec
- I/O Connector
- Network/Dante: RJ-45
- Analog input: Euroblock 3 pin
- Analog output: Euroblock 3 pin
- GPI: Euroblock 3 pin
- Phantom Power: Analog input: 12 V
