The new Engineered Sound®. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.
The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.
Audio-Technica ES905CL Features
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- ES905CL Rigid-Pipe Cardioid Condenser Microphone1
- AT8538 power module1
- #8 x 1" black oxide wood screws for microphone mount3
- M37 Case1
- Five Year Limited End User Warranty1
- Transducer TypeCondenser
- Polar PatternCardioid
- Frequency Response60 Hz - 20 kHz
- Output Impedance250Ω
- Open Circuit Sensitivity –38 dB (12.5 mV) re 1V at 1 Pa
- Low Frequency Roll Off 80 Hz, 18 dB/octave
- Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range 111 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 11-52V DC, 2 mA typical
- Weight (Microphone) 330 g (11.6 oz)
- Weight (Power Module) 81 g (2.9 oz)
- Weight Microphone: 330 g (11.6 oz)
- Power Module 81 g (2.9 oz)
- Cable 2.9 m (9.5') long, (permanently attached to microphone) 3.2 mm (0.13") diameter, 2-conductor, shielded cable terminated with TA3F-type connector
- Dimensions Microphone : 523.4 mm (20.61") long - 24.6 mm (0.97") head diameter
- Power Module92.9 mm (3.66") long, 18.9 mm (0.74") diameter
- Dimensions (Power Module) 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
- Dimensions (Microphone) 523.4 mm (20.61") long, 24.6 mm (0.97") head diameter
- Output Connector (Power Module) Integral 3-pin XLRM-type
- Output Connector Integral 3-pin XLRM-type (Power module)