• Audio-Technica U891RCB Boundary Microphone with Local / Remote Switching
1 1

Audio-Technica U891RCB Boundary Microphone with Local/Remote Switching

Audio-Technica U891RCB Boundary Microphone with Local/Remote Switching

SoundPro Item: 42217 | Part Number: U891RCB

$379.00
$379.00 $379.00
Your Price Sold out
MSRP: $379.00 | MAP: $379.00

Usually ships in 5-7 business days

  • Cardioid condenser boundary microphone with touch-sensitive capacitive-type user switch
  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • Logic I/O capability permits control of remote devices from the microphone’s touch-sensitive capacitive-type user switch
  • The capacitive touch switch can be set to any of three operating modes: touch on/off, touch to talk and touch to mute
  • Integral, phantom-powered, two-state RGB LED indicator, which can be controlled locally or remotely, displays on/off status of microphone
  • Superior off-axis rejection for maximum gain before feedback
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Small-diameter UniPoint® element near boundary eliminates phase distortion and delivers clear, high-output performance
  • Available interchangeable elements permit angle of acceptance from 100° to 360°
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics eliminate need for external power module
  • Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security
Log in or register for YOUR best price

A wide-range condenser microphone with a cardioid polar pattern, the U891RCb from Audio-Technica is equipped with local and remote switching options. Locally, the microphone’s touch-sensitive capacitive-type user switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute. For enhanced control in conference and boardroom installations, the unit’s external contact closure capability allows a user to trigger an external device – a camera, for instance – from the microphone’s user switch.

The phantom-powered mic is also equipped with an 80 Hz low-cut UniSteep® filter to reduce pickup of low-frequency ambient noise. Its two-state RGB LED status indicator can be controlled remotely. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; additional interchangeable elements are available separately in hypercardioid and omnidirectional polar patterns; a unique PivotPoint® rotating connector changes the cable exit point – no tools required. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone, while threaded inserts on the bottom of the microphone allow it to be mounted with screws for increased security. The unit’s self-contained electronics eliminate the need for an external power module.

View full details
  • Transducer TypeCondenser
  • Polar Pattern Cardioid
  • Frequency Response20 Hz - 20 kHz
  • Output Impedance50 ohms
  • Sensitivity-34 dBV/Pa (19.9 mV)
  • Low Frequency Roll Off80 Hz, 18 dB/octave
  • Maximum Input Sound Level 130 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range 104 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa, A-weighted
  • Phantom Power Requirements 11-52V DC, 9.3 mA
  • Switches
    • Activation: on/off
    • Switch function: touch on/off, momentary on, momentary off
    • Control: local, remote, LED remote
    • LED Color: mic on, mic off
    • Flat, roll-off
  • Weight 253 g (8.9 oz)
  • Cable 25 foot (7.6 m) long, 0.13" (3.2 mm) diameter, 5-conductor shielded cable (2 conductors under shield; 3 control wires outside shield); TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device
  • Dimensions 0.91" (23 mm) H x 3.30" (83.9 mm) W x 4.25" (108 mm) D
  • Output Connector
    • Microphone: TB3M-type
    • Cable: Unterminated

Why Choose SoundPro?

Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2