The EVENT-121A is a direct radiating rear-loaded powered subwoofer system which incorporates a single 21″ neodymium loudspeaker providing “earth-moving” low-frequency reproduction for the EVENT Series line arrays. The combination of direct radiation and rear-loading provides a high output, tight and accurate sub-bass response.
The EVENT-121A employs the new DAS 21LFN loudspeaker which offers impressive features such as a 4″ sandwich split winding voice coil, a powerful FEA optimized neodymium magnet assembly and a FEA optimized suspension system with double silicon spider. The result is a loudspeaker with exceptional sensitivity, high power handling capacity and a quality suspension design capable of withstanding the stress and mechanical fatigue of today´s high-power pro audio systems. An aluminum demodulating ring benefits lower distortion and effective forced ventilation of the voice coil gap provides for a high thermal rating, and reduced power compression.
The EVENT-121A electronics package includes a 3200 Wpeak Class D amplifier and 24-bit high-end DSP for top quality audio reproduction. On the rear panel, controls can be found for gain, polarity and a continually variable low-pass filter which ranges from 63 Hz to 100 Hz. A unique “cardioid preset” button simplifies the use of subs in cardioid configurations, making setup of two to three units a snap without the need for an external DSP. The EVENT-121A is phase response coherent with the EVENT-208A, EVENT-210A and EVENT-212A active tops offering precise alignment. Two balanced inputs with stereo filtered outputs which can be switched to pass-through connections are provided.
DAS Audio EVENT-121A Features
- Active direct radiating rear-loaded subwoofer system
- 1 x 21" DAS 21LFN neodymium loudspeaker
- 3200Wpeak - 1600W continuous
- Class D amplifier and digital signal processing (DSP)
- Two balanced inputs with stereo filtered output connections
- Variable low-pass filter 63 Hz-100 Hz
- Top located pole mount socket for TRD-6 optional pole mount
- Rear located wheels to ease transport
- Top grade birch cabinet construction
- Durable ISO-flex finish
- EVENT-121A powered subwoofer1
- Frequency range (-10dB)30Hz - 125Hz
- Max SPL (at 1m)141dB
- Nominal amplifier power
- Continuous: 1600W
- Peak: 3200W
- Input typebalanced
- Input impedance20k ohms
- Input sensitivity6.2V (+18dBu)
- Audio signal input connector2x female XLR
- Audio signal loop thru connector2x male XLR
- AC output connectorpowerCON NAC3MPB
- Current draw
- 115V: 3.6 A/7.2 A
- 230V: a:1:{i:0;s:5:”3.6 A”;}
- LF driver21LFN
- Constructionbirch plywood, black ISO-flex paint finish
- RiggingM10 rigging points
- Dimensions (HxWxD)38" x 29.1" x 29.7"
- Weight173.1 pounds (78.5 kg)
