Ferrofish Verto 64 Dante Converter

Retail Price $1,499.00
Savings $300.00
Sale Price $1,199.00
AvailabilityUsually ships in 3-5 days
Item13264

Documents
Ferrofish Verto 64 Dante Converter
Ferrofish Verto 64 Dante Converter

Dante is the de facto standard for networking audio equipment. With the Verto 64 it’s now possible to easily integrate up to 64 x 64 channels via ADAT into a Dante network. No matter which ADAT device you use – the Verto 64 makes all channels immediately avalilable in the network: “plug and play”.

The ultra compact device has 16 ADAT connectors: 8 for transmitting, and 8 for receiving digital data (8 channels each).

On the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto 64 supports up to 96kHz sample rate, MIDI jacks for control, and BNC wordclock jacks for external synchronization.

Converter Features

  • DANTE I/O
    • 2x Ethernet (PRI/SEC) sockets, 1GBit
    • 64x64 channel Brooklyn II board built-in
  • ADAT I/O (Only Verto 32 & 64)
    • 8x ADAT Input + 8x ADAT Output, optical TOSLINK (Verto 64)
    • 64x64 channels at 48kHz 32x32 channels at 96kHz
  • MIDI I/O
    • MIDI Standard 1.0 / 1996
    • 2x DIN female 5pin In/Out for embedding / de-embedding MIDI-over-MADI messages
  • Wordclock - 2x BNC In/Out, 75 Ohm termination set to on by default. Can be changed from software via DANTE.
  • Fuse - Polyfuse internal, self-resetting
  • Power consumption - 14.4VA (1.2A at 12V)
  • Temperature range - +5°C to +45°C
  • Humidity - <75%, non-condensing
  • Dimensions - 22 x 9 x 4,5 mm (without rack ears)
  • Weight - 0.9 kg
WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov