The MC3™ monitor controller is a studio tool that enables you to take command of your monitor system, with the ability to quickly select between two sets of powered speakers and adjust signal levels, and additional control for headphones and a subwoofer.
The MC3 handles all of your studio monitor switching needs in a small footprint that easily fits on any desktop. Connect two sets of powered speaker and a subwoofer and easily select any combination, with a large master volume control for setting levels. A Dim switch lets you temporarily lower the speaker level without altering your main volume setting, and a Mono switch provides an easy way to check for phase compatibility. The MC3 features a passive audio circuit for clean and transparent audio, along with an active headphone amp to drive multiple sets of headphones and monitor silently when necessary.
Radial MC3 Features
- Passive studio monitor switcher with headphone amp
- Control two sets of monitors and subwoofer
- Mono sum for AM radio compatibility and phase check
- Individual 'set & forget' controls to fine tune levels
- MC3 Monitor Controller1
- Three Year Warranty (transferable)1
- Audio circuit type Passive stereo signal path with active sub & HP
- Frequency response DC ~ 20kHz (+0dB/-1dB)
- Dynamic range 114dB
- Total harmonic distortion 0.001% @ 1kHz/0dBu output
- Intermodulation Distortion 0.001% @ 1kHz/0dB output
- Input Impedance 4.4k Ohms balanced / 2.2k Ohms unbalanced
- Output Impedance Varies with level adjustment
- Common Mode Rejection Ratio -51dB @ 55Hz
- Noise Floor Stereo: -108dBu; Sub: -95dBu; Headphone: -87dBu
- Maximum Input +14dBu
- Features
- Input Connectors: 2 1/4" TRS inputs
- Output Connectors: Four 1/4" TRS monitor outputs, Aux and Mono subwoofer outputs, Two 1/4" headphone jacks, 1/8" TRS headphone connector
- Extras: Trim level control for DIM, Mon-A, Mon-B and Sub outputs, Variable Dim attenuation up to -72dB
- Construction 14-gauge steel chassis & outer shell
- Size (LxWxD) 3.3x5x2" (84x127x48mm)
- Weight 1.32lb (0.6kg)
- Shipping size (LxWxD) 4.75x2.5x10.75" (121x64x273mm)
- Shipping weight 3 lbs (1.3kg)
- Power +15VDC/400mA adapter included / 110V
- Conditions For use in dry locations only between 5°C and 40°C
