Earthworks PM40T PianoMic Touring Piano Microphone System

The PM40T Touring PianoMic™ System, offering the features and sonic performance of our PM40 PianoMic™ System while offering quick, simple, and easy setup, in a compact airline friendly carry-on case.

The PianoMic™ System was designed to revolutionize piano miking and achieve an incredible improvement in piano sound for live and recording applications with no mic stands or booms. There is more gain before feedback, significantly less leakage from surrounding instruments and the same pristine sound quality with the piano lid either up or down. At the heart of the system are two Random Incidence, omnidirectional, 40 kHz High Definition Microphones™. With a frequency response of 9 Hz to 40 kHz, the mics deliver extraordinary impulse response and extremely short diaphragm settling times. In addition, the microphones exhibit no proximity effect, regardless of their distance from the piano strings or soundboard. The mics, when positioned close to the sound source, also provide incredible gain before feedback.

Earthworks PM40T Features

• Touring model
• Cannot be seen from outside of the piano (needs no stands or mic booms)
• Superb sound with the piano lid either up or down
• Virtually no leakage from sounds outside the piano
• Incredible gain before feedback
• Recording studios can now record piano with other instruments in the same room
• Handles sound pressure levels up to 148dB
• Quick, Simple and Easy Setup
• 40kHz Random Incidence Omnis
• Hear the full range of the piano including the high and low strings with no hot spots
• Telescoping bar allows the PianoMic™ to be quickly and easily installed in nearly all grand pianos and to place the microphones close to or away from the dampers and get the exact sound desired

• PianoMic™ telescoping bars with attached microphone heads2
• Microphone electronics box1
• Leather pouch for electronics box1
• Felt pads with adhesive backing2
• Carrying case1

• Transducer TypeCondenser
• Polar PatternOmnidirectional
• Frequency Response9 Hz - 40 kHz
• Output Impedance65Ω balanced (between pins 2 & 3)
• Min. Output Load600Ω between pins 2 & 3
• Sensitivity15mV/Pa (-36dBV/Pa)
• Power Requirements24-48V Phantom, 10mA
• Max. Acoustic Input150dB SPL
• OutputXLR (pin 2+)
• Noise20dB SPL equivalent (A weighted)
• Dimensions64" fully extended, 46" fully collapsed
• Mic Assembly Weight0.75 pounds