![QSC AD-C6T Ceiling Mount Speaker, black](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/2555/38174/18437__41874.1675891983.jpg?c=1")
The QSC AcousticDesign™ AD-C6T is a 6.5" two-way ceiling loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16O bypass configurations.
The AcousticDesign™ Series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the AcousticDesign series allows integrators seamless transitions within blended installations.
QSC AD-C6T Features
- Priced individually, sold in quantities of 2
- Consistent tonal characteristics across the entire AcousticDesign family for surface, ceiling, and pendant applications
- DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Intrinsic Correction™ voicings available via Q-SYS Platform including CXD-Q Series amplifiers
- Low-saturation and low-loss 70/100V transformers with 16O bypass
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- UL1480 and UL2043 certified EN54-24 Type A, 0359-CPR-00623
- Available in black (RAL 9011) or white (RAL 9010)
- AD-C6T Ceiling Mount Speakers2
- C-ring and Tile Rails1
- Rail Screws1
- Euroblock Connector1
- Cut-Out Template1
- Tether Grilles1
- Effective frequency range65 Hz – 20 kHz
- Rated noise power / voltage60 watts / 31 volts (rms)
- Sensitivity [dB]88 Sensitivity at 4m, 100V maximum tap: TBD
- Rated coverage (-6 dB)135° conical DMT™
- Directivity factor (Q)6.5
- Directivity index (DI) [dB]8
- Maximum continuous SPL [dB]5106
- Maximum peak SPL [dB]5112
- Nominal impedance [ohms]16
- Recommended amplifier120 watts
- Transformer taps / impedance
- 16Ω (in bypass setting)
- 7.5W (70V); 15W (100V) Tap: 667Ω
- 15W (70V); 30W (100V) Tap: 333Ω
- 30W (70V); 60W (100V) Tap: 167Ω
- 60W (70V); N/A (100V) Tap: 83Ω
- LF transducer 6.5-inch (165 mm) weather resistant paper cone woofer
- HF transducer 1 inch (25 mm) aluminum dome tweeter
- Input connector typeEuroblock connector with parallel output
- Enclosure material ABS baffle on powder coated steel back can
- Grille materialPowder coated steel
- Ingress protectionIP-34
- Operating environment Designed for indoor use
- Operating temperature range-4 to 122° F (-20 to 50° C)
- Cutout dimensionØ 245 mm [Ø 9.65-inch]
- Net weight9.5 lbs (4.3 kg)</li>
- Product dimensions (Diameter x Height)Ø 280 x 237 mm [Ø 11.02 x 9.32-inch]
- Shipping weight (pair packed)27.8 lbs (12.6 kg)
- Shipping dimensions (H x W x D)13 x 29 x 15 inches (330 x 737 x 381 mm), pair packed
- Safety Agency
- EN54-24: 2008 type A (No. pending)
- UL1480, UL2043, NFPA90, NFPA70 suitable for use in air handling spaces. Transformer UL registered per UL1876, ROHS, C-Tick X000, CE compliant. Baffle meets UL94-V0 and UL94-5VB flammability rating; in accordance with IEC60849 / EN60849 systems.
