![Earthworks SR25mp Cardioid Microphones Matched Pair](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/3910/6719/19527-1__23857.1645823123.JPG?c=1")
Earthworks SR25mp Cardioid Condenser Mic (Matched Pair) Earthworks cardioid microphones are unlike all the rest, as they have patented near-perfect cardioid patterns. The sound across the entire front hemisphere is remarkably uniform and is flatter at 90 degrees than most microphones are on-axis. This results in uncolored off-axis rejection for recording and greater gain before feedback for live sound. They effortlessly handle up to 145dB SPL while simultaneously revealing subtle details that other microphones mask. All SR models are a superb value and will provide excellent results for both live performance and recording applications. The SR25 was specifically designed for drums and is also ideal for a wide variety of other instruments. It's high frequency response goes to 25kHz.
Earthworks SR25mp Features
- The capsule features a cardioid pick up pattern providing high gain before feedback
- Superb off-axis rejection of audio signal make the SR25 suitable for capturing audio in highly ambient environments and near monitor speakers
- The SR25 features an even frequency and sensitivity response at the entire front of the capsule
- SR25 cardioid microphones2
- Microphone clips2
- Microphone bags2
- Foam windscreens2
- Tip protectors2
- Transducer TypeCondenser
- Polar PatternCardioid
- Frequency Response20 Hz - 25 kHz
- Output Impedance65 ohms
- Min. Output Load600 ohms
- Sensitivity10mV/Pa (-40dBV/Pa)
- Power Requirements24-48v Phantom Power, 10mA
- Signal to Noise Ratio78dB (A-weighted)
- Peak Acoustic Input145dB SPL
- OutputXLR (pin 2+)
- Self Noise20dB SPL (A weighted)
- Dimensions (LxD)6.5" x 0.86"
- Colorstainless steel
- Weight0.35 pounds each
