Temblor® T8 Active Studio Subwoofers from PreSonus are the natural sub-bass extension for virtually any small full-range studio monitoring system, home stereo, or home theater system. A subwoofer provides the extra-deep low frequencies you need when mixing on relatively small monitors, especially for music that requires serious low-end punch. Temblor-series subs complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end.
Powerful and musical, the Temblor T8 is designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. Its glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.
PreSonus Temblor T8 Features
- 8-inch, downward-firing, glass-composite low-frequency transducer
- Round, front-firing, bass-reflex acoustic port
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz) allows seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Polarity invert
- 200 watt, Class AB amplification
- Internal damping and heat sink
- Integrated rubber feet for stable placement
- Left and right, balanced ¼” TRS and unbalanced RCA main inputs
- Left and right, balanced ¼” TRS and unbalanced RCA outputs
- Temblor T8 Active Studio Subwoofer1
- Inputs
- 2- Balanced ¼” TRS
- 2- Unbalanced RCA
- Outputs
- 2- Balanced ¼” TRS (full range with 80 Hz HPF option
- 2- Unbalanced RCA (full range with 80 Hz HPF option)
- Performance
- Frequency Response: 30 Hz – 200 Hz
- Low Pass Filter Frequency: 50 – 130 Hz (variable)
- Signal-to-Noise Ratio: >98 dB (A weighted)
- THD: 0.05%
- Amplifier Power: 200W peak, 100W RMS
- Power Consumption: 120W
- Amplifier Type: Class AB
- Peak SPL at 1m: 104 dB
- Woofer: 8” glass-composite, downward-firing
- Acoustic Port: Front-firing bass reflex (round)
- User Controls
- Input Gain Range: -30 to +6 dB
- Polarity Switch: 0° or 180°
- Low Pass Filter Control: 50 Hz to 130 Hz
- High Pass Filter Switch: On/Off
- Protection
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
- Power100-120V ~50/60 Hz or 220-240V ~50/60 Hz
- CabinetVinyl-laminated MDF
- Dimensions10.2x12.6x11" (260x320x280mm)
- Weight21.2 lbs (9.6 kg)