The Shure A15HP in-line filter passes mid and high frequencies while reducing low frequencies. The A15HP helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand. The A15HP affects frequencies below 100 Hz. When connected to the microphone input on a typical mixer (800 ohms impedance or higher), the A15HP reduces low frequencies by 12dB per octave. Female XLR to male XLR connector.
Shure A15HP Features
- Passes mid and high frequencies while reducing low frequencies
- Helps eliminate electrical and mechanical noise in an audio system
- Affects frequencies below 100 Hz
- Female XLR to male XLR connector
- A15HP in-line high pass filter1
- Frequency Responseflat above rolloff point; -0.5 dB maximum at 1 kHz
- ImpedanceEIA rated at 150 Ω
- Distortion2.5% maximum (100 mV, open circuit voltage)
- Connectors
- Input: XLR, female
- Output: XLR, male
- Housingfull magnetic shield, steel with gray enamel finish
- Dimensions0.75" diameter, 4.5" length
