The Shure Battery Rack Charger (SBRC) provides a seamless, touring-ready battery charging and storage solution. Interchangeable charging modules support a variety of Shure Lithium-ion batteries, accommodating up to 8 batteries in a single rack space. An easy-to-read front panel displays critical parameters including charge levels, time-to-full, and battery health indicators such as temperature and cycle count. Shure Wireless Workbench® software provides remote monitoring of battery status when SBRC is connected to a network. Compatible with Shure rechargeable batteries SB910, SB920A, SB910M, AXT910, AXT920 and SB900B. Charging modules sold separately.
Shure SBRC Features
- Comprehensive status display with straightforward three-button interface control
- Easily visible charge status by percentage and time-to-full readings in hours and minutes
- Battery health tracking metrics indicate percentage of original capacity and cycle count
- Remote monitoring of battery status available through Shure Wireless Workbench software
- Interchangeable charging modules allow users to mix and match up to 8 Shure bodypack and handheld transmitter batteries
- Charges batteries to 50 percent capacity within an hour and full capacity within 3 hours
- Storage mode prepares batteries for optimal long-term storage
- Compatible with modules for SB910, SB920A, SB910M, AXT910, AXT920 and SB900B batteries.
- SBRC Rack Battery Charger1
- IEC AC Power Cable1
- Shielded 3-ft Ethernet Cable1
- Hardware Kit1
- Mounting Screws8
- Battery Type Up to 8 rechargeable Li-Ion batteries
- Charge Time 50%=1 hour; 100%=3 hours
- Charging Module Type Up to 4 charging modules (in any combination)
- Operating Temperature Range -18°C (0°F) to 63°C (145°F)
- Battery Charging Temperature Range 0°C (32°F) to 60°C (140°F)
- Storage Temperature Range -29°C (-20°F) to 74°C (165°F)
- Dimensions 44 mm x 483 mm x 366 mm (1.7 in. x 19.0 in. x 14.4 in.), H x W x D
- Weight 4.4 kg (9.8 lbs), without batteries or charging modules
- Housing Steel; Extruded aluminum
- Power Requirements
- Input 100 to 240 V AC, 50-60 Hz
- Output 4.5 V DC maximum, 60 W maximum
- Current Drain1.8 A RMS (referenced at 90 V AC)
- Network Interface Ethernet 10/100 Mbps
- Network Addressing CapabilityDHCP or Manual IP address
