The Shure MX150/C Condenser Lavalier Microphoneprovides uncompromised sound quality and high reliability with minimal visibility. It features CommShield technology to stop RF interference, user-changeable equalization caps, and a windscreen for wind protection.
The MX150B provides uncompromised sound quality and high reliability with minimal visibility for use in television broadcasting, corporate lectures, A/V teleconferencing, House of Worship, and sound reinforcement.
Shure MX150/C Features
- CommShield® Technology guards against interference from cellular RF devices and digital bodypack transmitters
- Matte Black, sleek, low-profile design for inconspicuous placement
- Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimized handling noise
- Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
- Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
- Legendary Shure quality, ruggedness, and reliability
- MX150/C Condenser Lavalier Microphone1
- Multi-Position Tie Clip1
- Snap-fit Windscreen1
- Storage Pouch1
- RFI Resistant, Inline Preamp for all MX Models (Black)1
- Transducer TypeCondenser
- Polar PatternCardioid
- Frequency Response20 Hz - 20 kHz
- Output Impedance165.0 &Omega
- Sensitivity (open circuit voltage, @ 1 kHz, typical)–39.0 dBV/Pa[1] (11.0 mV)
- Maximum SPL (1 kHz at 1% THD[2])134.5 dB SPL 2500 Ωload; 129.5 dB SPL 1000 Ωload
- Signal-to-Noise Ratio[3]57.0 dB
- Dynamic Range (@1 kHz)97.5 dB SPL 2500 Ωload; 97.5 dB SPL 1000 Ωload
- Self Noise (equivalent SPL, A-weighted, typical)37.0 dB
- Clipping Level (1 kHz at 1% THD)1.0 dBV: –4.5 dBV
- Common Mode Rejection (20 to 20,000 Hz)>60 dB
- Power Requirements11–52 V DC[4] phantom power (IEC-61938), <2.2 mA
- Weight4.3 oz (121 g)
- Operating Temperature Range-18°C (0°F) to 57°C (135°F)
- Storage Temperature Range-29°C (-20°F) to 74°C (165°F)
- Notes
- [1] 1 Pa=94 dB SPL
- [2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
- [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
- [4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
