The P10T is a networkable, full-rack, dual channel wireless transmitter used in conjunction with the P10R Wireless Bodypack Receiver as part of the PSM®1000 Personal Monitor System. It offers a 72 MHz wide tuning bandwidth, networked remote control via Wireless Workbench® software, advanced rechargeability options, and PSM®900 backwards compatibility.
Connections include balanced ¼" and XLR, loop out, dual Ethernet ports, and headphone monitor out. Comes with front or back mountable antennas, and power and Ethernet jumper cables. Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
Shure P10T Features
- Full rack, dual-channel transmitter in a professional, touring grade chassis
- 72 MHz wide tuning range provides flexibility and performance in crowded, unpredictable RF environments
- Networkable over Ethernet connection to provide comprehensive frequency coordination and transmitter remote control via Wireless Workbench® software
- Backwards-compatible with PSM®900 receivers
- RF Mute Switch allows system setup without causing RF interference
- Sync RF scan information from a P10R bodypack quickly and easily over IR link
- Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
- Spectrum display provides a detailed frequency plot on the menu screen with selectable zoom
- Front panel audio input gain adjustment and LED level meter with clipping indicator
- Exceptional transmitter linearity vastly reduces frequency intermodulation, allowing more compatible channels per frequency range
- High-contrast LCD with grouped menu items provides an intuitive user interface
- Front or back mountable antennas
- Compatible with PA821B and PA821A antenna combiners
- Loop out connectors for multiple mix setups and easy installation
- Switchable +4dBu and -10 dBV input level
- Balanced, ¼" and XLR connectors
- 1/8" headphone out on the front panel for easy monitoring
- P10T Wireless Transmitter1
- RF Output Power Selectable10, 50, 100 mW (regionally dependent)
- RF Output Impedance50 Ω (typical)
- Net Weight10.4 lbs (4.7 kg)
- Dimensions44 x 483 x 343 mm
- Power Requirement (RF on, 100 mW power mode, no audio)
- Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded)
- Output: 100-240V AC, 5A max, unswitched
- Audio Input
- Connector Type: Combination XLR and 6.35 mm (1/4”) TRS
- Polarity
- XLR: Non-inverting (pin 2 positive with respect to pin 3)
- 6.35 mm (1/4”) TRS: Tip positive with respect to ring
- Configuration: Electronically balanced
- Impedance: 70.2 kΩ (actual)
- Nominal Input Level
- Switchable: +4 dBu, –10 dBV
- Maximum Input Level
- +4 dBu: +29.2 dBu
- –10 dBV: +12.2 dBu
- Pin Assignments
- XLR: 1=ground, 2=hot, 3=cold
- 6.35 mm (1/4”) TRS: Tip=hot, Ring=cold, Sleeve=ground
- Phantom Power Protection: Up to 60 V DC
- Audio Output
- Connector Type: 6.35 mm (1/4”) TRS
- Configuration: Electronically balanced
- Impedance: Connected directly to inputs
