null Skip to main content
Shure PGXD2/BETA58 Handheld Wireless Microphone Transmitter
Shure PGXD2/BETA58 Handheld Wireless Microphone Transmitter
$269.00

Shure PGXD2/BETA58 Handheld Wireless Microphone Transmitter

(No reviews yet)
SoundPro Item: 23911
MPN: PGXD2/BETA58=-X8
  • Videos

  • Shure PGXD2/BETA58 Handheld Wireless Microphone Transmitter
MSRP: $339.00
$269.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The PGXD2/BETA58 handheld wireless microphone transmitter delivers stellar sound and a strong, clean RF signal with state-of-the-art, 24-bit digital audio and interchangeable BETA58A microphone cartridge. Shure microphones have been trusted by musicians for over 80 years. The PGXD2/BETA58 Handheld Wireless Microphone Transmitter is no exception. This handheld mic is constructed with durability in mind for a reliable performance, time and time again.

Meet the wireless mic set that matches your vocal potential. The BETA® 58A has been put through its paces for decades, pushing voice to the forefront on the biggest stages in the world, making it a top-selling, single element, dynamic wireless mic. The BETA 58A wireless microphone is made for refined voice. The brightened midrange and bass roll-off give lead and background vocals a mighty presence in the mix. And the supercardioid pattern works harder to isolate your sound from every other source in the air. It's a vocalist's best friend. The hardened steel mesh grille stands up to some of the roughest sweat drips, mic drops and van rides, without so much as a dent to show for it.

The PGXD2/BETA58 Handheld Wireless Microphone Transmitter works with PGX-D Digital Wireless Systems.

Shure PGXD2/BETA58 Features

  • Power, mute, and battery status LED
  • 10 dB of adjustable gain
  • Lockable interface prevents accidental setting changes
  • Up to 9 hours of continuous use from 2 AA batteries
  • Up to 200 ft (60 m) range for total wireless freedom
  • PGXD2 Handheld Wireless Microphone Transmitter1
  • BETA58 Microphone Capsule1
  • Working Range Line of Sight60m (200 ft)[1]
  • RF Carrier Range
    • X8: 902–928 MHz
    • X8A: 915–928 MHz
    • X8B: 902–907.5 MHz, 915–928 MHz
  • Audio Frequency Response20 to 20,000 Hz
  • System Gain
    • PGXD1
      • 6.35 mm Connector: 0 dB at minimum gain setting
      • XLR output: -12.5 dB at minimum gain setting
    • PGXD2
      • XLR output: -54.5 dBV/Pa at –10 dB gain setting
  • Total Harmonic Distortion<0.02%, A-weighted, typical
  • Dynamic Range>108 dB, A-weighted
  • Operating Temperature Range-18°C (0°F) to +50°C (122°F)
  • Transmitter Audio PolarityPositive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of low-impedance output and the tip of the high impedance 1/4-inch output
  • Audio Input Level
    • at minimum gain setting: +10 dBV maximum
    • at maximum gain setting: -16 dBV maximum
  • Gain Adjustment Range26 dB
  • Input Impedance1 MΩ
  • RF Output Power10 mW
  • Pin Assignments
    • 1: ground (cable shield)
    • 2: + 5 V Bias
    • 3: audio
    • 4: On instrument adapter cable, pin 4 floats
  • Dimensions108x64x19 mm
  • Weight128 g (4.5 oz.) (without batteries)
  • HousingMolded Polycarbonate Case
  • Power Requirements2 AA size alkaline or rechargeable batteries
  • Battery Lifeup to 10 hours
  • Audio Input Level
    • at minimum gain setting: +10 dBV maximum
    • at maximum gain setting: -16 dBV maximum
  • Gain Adjustment Range26 dB
  • Input Impedance1 MΩ
  • RF Output Power10 mW
  • Pin Assignments
    • 1: ground (cable shield)
    • 2: + 5 V Bias
    • 3: audio
    • 4: On instrument adapter cable, pin 4 floats
  • Dimensions108x64x19 mm
  • Weight128 g (4.5 oz.) (without batteries)
  • HousingMolded Polycarbonate Case
  • Power Requirements2 AA size alkaline or rechargeable batteries
  • Battery Lifeup to 10 hours
  • Dimensions40 mm x 181 mm x 104 mm
  • Weight289 g (10.2 oz.)
  • HousingABS
  • Sensitivity-102 dBm at 10-5 BER
  • Power Requirements12-18 V DC at 150 mA, supplied by external power supply (tip positive)
  • Audio LED
    • Red: 2 dB below clip
    • Amber: 12 dB below clip
    • Green: 50 dB below clip
  • ConfigurationImpedance Balanced
  • Maximum Audio Output Level
    • XLR connector: -2.5 dBV
    • 6.35 mm Connector: +10 dBV
  • Impedance
    • XLR: 50Ω
    • 6.35 mm Connector: 50Ω
  • Pin Assignments
    • XLR: 1=ground, 2=audio, 3=no audio
    • 6.35 mm (1/4") TRS Tip=audio, Ring=no audio, Sleeve=ground

In The Box

Videos Hide Videos Show Videos

Customer Reviews