Shure PGXD4 Wireless Receiver

With 24-bit, 48 kHz digital audio technology, the PGXD4 Wireless Receiver from Shure boasts true digital diversity, with two antennas and two independent receivers cooperating rock-solid RF signal. The PGXD4’s One Touch Scan functionality instantly finds a clear frequency so you can get up and running.

More about the PGX-D Series from Shure

Building on the trusted legacy of Shure’s wired microphones, the PGX-D series cuts the cord and provides expanded freedom with digital, wireless audio systems that are designed with small venues in mind. Boasting wireless audio that sounds like wired, PGX-D features state-of-the-art, 24-bit digital RF technology to deliver a rock-solid, clean, and professional-quality performance even at extended distances. Its simple, plug-and-play setup and one-touch operation make it a great choice of sound system for applications where you don’t have time or staff for expensive training, such as a house of worship, a smaller club, and more.

Other features of the PGX-D include its compatibility with a wide range of Shure’s rugged and dependable microphones, up to 10 hours of battery life, and a wireless range of up to 200 feet (60m)  within line-of-sight. With an operation of 900 MHz, the PGX-D enjoys audio that’s free from white spaces or DTV interference.

All PGX-D Systems Include:

• One PGXD4 receiver
• Two AA alkaline batteries
• One Power supply
• One User Guide

In addition, PGX-D offers specifically designed wireless systems that let you select a system that’s personalized to your application and artistry. Whether you’re a vocalist, musician, or presenter, PGX-D has you covered.

Included with PGX-D Vocalist Systems:

• One PGXD2 handheld transmitter
• One Microphone head (Choose from the PG58, SM58^®, SM86, or Beta 58A^® The Beta 87A is also available in select markets.)
• One Microphone clip

Included with PGX-D Lavalier, Headworn, and Instrument Systems:

• One PGXD1 bodypack transmitter
• One Microphone (Choose from the WL93, WL185, PGA31, or Beta 98H/C microphones)

Included with PGX-D Guitar Systems:

• One PGXD1 bodypack transmitter
• One 1/4” to mini 4-pin guitar cable (WA302)

Shure PGXD4 Features

• 24-bit / 48kHz digital technology for incredibly accurate sound
• Automatic frequency selection locates a clear channel instantly
• One-touch sync automatically syncs the transmitter and receiver
• True digital diversity for rock-solid wireless signal reliability
• Up to 5 compatible channels per frequency band
• ¼" and XLR audio outputs
• Included padded carrying case for portability and protection

• PGXD4 Wireless Receiver1
• Padded carrying case1

• Working Range Line of Sight60m (200 ft)[1]
• RF Carrier Range
  • X8: 902–928 MHz
  • X8A: 915–928 MHz
  • X8B: 902–907.5 MHz, 915–928 MHz
• Audio Frequency Response20 to 20,000 Hz
• System Gain
  • PGXD1
    • 6.35 mm Connector: 0 dB at minimum gain setting
    • XLR output: -12.5 dB at minimum gain setting
  • PGXD2
    • XLR output: -54.5 dBV/Pa at –10 dB gain setting
• Total Harmonic Distortion<0.02%, A-weighted, typical
• Dynamic Range>108 dB, A-weighted
• Operating Temperature Range-18°C (0°F) to +50°C (122°F)
• Transmitter Audio PolarityPositive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of low-impedance output and the tip of the high impedance 1/4-inch output
• Audio Input Level
  • at minimum gain setting: +10 dBV maximum
  • at maximum gain setting: -16 dBV maximum
• Gain Adjustment Range26 dB
• Input Impedance1 MΩ
• RF Output Power10 mW
• Pin Assignments
  • 1: ground (cable shield)
  • 2: + 5 V Bias
  • 3: audio
  • 4: On instrument adapter cable, pin 4 floats
• Dimensions108x64x19 mm
• Weight128 g (4.5 oz.) (without batteries)
• HousingMolded Polycarbonate Case
• Power Requirements2 AA size alkaline or rechargeable batteries
• Battery Lifeup to 10 hours
• Audio Input Level
  • at minimum gain setting: +10 dBV maximum
  • at maximum gain setting: -16 dBV maximum
• Gain Adjustment Range26 dB
• Input Impedance1 MΩ
• RF Output Power10 mW
• Pin Assignments
  • 1: ground (cable shield)
  • 2: + 5 V Bias
  • 3: audio
  • 4: On instrument adapter cable, pin 4 floats
• Dimensions108x64x19 mm
• Weight128 g (4.5 oz.) (without batteries)
• HousingMolded Polycarbonate Case
• Power Requirements2 AA size alkaline or rechargeable batteries
• Battery Lifeup to 10 hours
• Dimensions40 mm x 181 mm x 104 mm
• Weight289 g (10.2 oz.)
• HousingABS
• Sensitivity-102 dBm at 10-5 BER
• Power Requirements12-18 V DC at 150 mA, supplied by external power supply (tip positive)
• Audio LED
  • Red: 2 dB below clip
  • Amber: 12 dB below clip
  • Green: 50 dB below clip
• ConfigurationImpedance Balanced
• Maximum Audio Output Level
  • XLR connector: -2.5 dBV
  • 6.35 mm Connector: +10 dBV
• Impedance
  • XLR: 50Ω
  • 6.35 mm Connector: 50Ω
• Pin Assignments
  • XLR: 1=ground, 2=audio, 3=no audio
  • 6.35 mm (1/4") TRS Tip=audio, Ring=no audio, Sleeve=ground