The SM27 from Shure is a large-diaphragm, side-address cardioid condenser microphone for nuanced vocals and instruments. Enjoy natural reproduction of your sound with this mic’s flat, neutral frequency response and low self-noise. This feature-packed mic includes a preamplifier for transparency, switchable low-frequency filter, and a -15dB switchable attenuator for SPL versatility.
Rugged and versatile, the SM27 is designed to deliver outstanding performance both in the studio and live on stage. It boasts three separate mesh layers that reduce wind and breath noise. Its uniform cardioid pattern provides superior off-axis rejection, while the 3-position switchable low-frequency filter minimizes unwanted background noise and counteracts proximity effect for consistent, extended low-end. Its large, yet low-mass Mylar® diaphragm allows the SM27 to achieve a superb transient response, while its 15 dB pad delivers consistent performance across a wide range of high SPL sources.
Also included in the box with the Shure SM27 Large Diaphragm Condenser Microphone is an A32M ShureLock™ Black Swivel Adapter for secure and easy setup and positioning, as well as an A32ZB Zippered Carrying Bag for safe transport from gig to gig and secure storage when your mic is not in use.
More about Shure SM Microphones
Designed for extraordinary performances either live on stage or for recording in the studio, Shure’s SM Microphones Series boasts a decades-long legacy that has made them the industry standard for performing artists and audio engineers. They are characterized by a unique mix of professional audio quality and rugged dependability and are designed to be virtually indestructible to meet the stringent expectations of touring and long-term use. Every member of the SM Series features custom-engineered frequency response curves, delivers enhanced gain-before-feedback, and provides better cut-through in live sound environments.
Shure SM27 Features
- Uniform cardioid pattern for superior off axis rejection
- Superior transient response from a low-mass large Mylar® diaphragm
- Flat, neutral frequency response for natural reproduction on stage or in the studio
- 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
- Durable metal construction
- Three separate mesh layers reduces wind and breath noise
- 15dB pad for performance consistency across a wider range of high SPL sources
- SM27 Condenser Microphone1
- Swivel Adapter1
- Zippered Pouch1
- Transducer TypeCondenser
- Polar PatternCardioid
- Frequency Response20 Hz - 20 kHz
- Output Impedance150 Ω (140 Ω actual)
- Sensitivity (at 1 kHz, Open circuit voltage)−37 dBV/Pa 1 Pascal=94 dB SPL
- Maximum SPL (1 kHz at 1% THD)
- 1000 Ω load: 133 dB (147 dB, Pad on)
- 2500 Ω load: 138 dB (152 dB, Pad on)
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)84.5 dB
- Dynamic Range (at 1 kHz)
- 1000 Ω load: 123 dB
- 2500 Ω load: 128 dB
- Common Mode Rejection (20 Hz to 20 kHz)> 50 dB
- Clipping Level (20Hz-20 kHz at 1% THD)
- 1000 Ω load: 1 dBV
- 2500 Ω load: 7 dBV
- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
- Self Noise (typical, equivalent SPL, A-weighted)9.5 dB
- PolarityPositive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Switch
- Attenuator: -15 dB
- Low frequency response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
- ConnectorThree-pin professional audio (XLR), male
- Power Requirements48 Vdc phantom, 5.4 mA
- Weight642 g
