null Skip to main content
Shure ULXD4 Digital Wireless Receiver
Shure ULXD4 Digital Wireless Receiver
$1,040.00

Shure ULXD4 Digital Wireless Receiver

SoundPro Item: 24866
MPN: ULXD4=-G50
MSRP: $1,274.00
$1,040.00

Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Digital Wireless Systems. Receiver is available in different frequencies.

With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

Shure ULXD4 Features

  • Predictive switching diversity
  • High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
  • Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
  • Interference detection and alerts provided on both the receiver and Wireless Workbench 6
  • Front panel gain adjustment buttons provide up to 60 dB additional gain
  • AES 256-bit encryption-enabled for applications where secure transmission is needed
  • Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control
  • Support for frequency coordination with the Axient Spectrum Manager
  • Rugged metal chassis
  • Intuitive front panel LCD menu and controls with lockout feature
  • Upgraded LCD with adjustable contrast and brightness
  • Audio and RF LED meters with peak indicator
  • Remoteable 1/2 wave antennas
  • Furnished rack hardware
  • ULXD4 digital wireless receiver1
  • RF input
    • Spurious rejection: >80dB, typical
    • Connector type: BNC
    • Impedance: 50Ω
    • Bias voltage: 12-13V DC, 170mA maximum, per antenna
  • Audio output
    • Gain adjustment range: -18 to +42dB in 1dB steps (plus mute setting)
    • Configuration: 1/4" impedance balanced (tip=audio, ring=no audio, sleeve=ground); XLR balanced (1=ground, 2=audio+, 3=audio-)
    • Impedance: 100Ω (50Ω unbalanced from 1/4" output)
    • Full scale output: +12dBV (1/4"), +18dBV (XLR Line setting), -12dBV (XLR Mic setting)
    • Mic/line switch: 30dB pad
    • Phantom power protection: yes
  • Networking
    • PoE: no, protected
    • Network interface: single port Ethernet 10/100 Mbps
    • Network addressing capability: DHCP or Manual IP address
    • Max Ethernet cable length: 328 ft (100 m)
  • Housinggalvanized steel
  • Dimensions (HxWxD)7.75" x 6.75" x 1.65"
  • Weight2 pounds (without antennas)

In The Box

Videos Hide Videos Show Videos