The unique design of the Sceptre® S6 Powered Studio Monitor from PreSonus delivers pure and honest sound reproduction that reveals subtle nuances in recordings that cannot be heard in other monitors. Sceptre-series studio monitors provide extensive user-adjustable contour features that let you optimize the monitors for your mixing space and enables you to fully integrate them into any studio environment. The result is panoramic imaging, finely detailed transient response, unmatched lifelike sonic reproduction, and stunning dynamics.
The phase relationships of individual harmonics are a critical part of the characteristic “sound” of an instrument or voice. When they are reproduced accurately, the result is sonic transparency, definition, and intelligibility. By maintaining the transient reproduction, even at high volumes, Sceptre S6 speakers minimize distortion and produce clean, clear, consistent audio at any SPL.
PreSonus Sceptre S6 Features
- Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
- Coaxial transducer integrates 6.5-inch midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
- Powerful DSP provides critical Temporal Equalization™ with multiple FIR filters
- HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
- Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
- High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope)
- Sensitivity (+4 dBu to -10 dBV)
- 180W RMS, Class D biamplification with internal heat sink
- RF shielding, current-output limiting, and over-temperature protection
- Amplifier “soft start” feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
- Balanced XLR and ¼-inch TRS line-level inputs with A-taper level control
- Sceptre S6 powered studio monitor1
- Inputs(1) balanced XLR, (1) balanced 1/4" TRS
- Frequency response52Hz - 20kHz (-3dB), 42Hz - 23kHz (-10dB)
- Crossover frequency2.2kHz
- LF amplifier power90W (@4Ω)
- HF amplifier power90W (@4Ω)
- Peak SPL109dB (@ 1 meter)
- LF driver6.5" glass-reinforced paper
- HF driver1" diaphragm compression paper
- Input impedance10kΩ
- Volume range controlA-type taper
- HF controlflat, +1dB, -1.5dB, -4dB
- Low cut controlflat, 60Hz, 80Hz, 100Hz
- Acoustic space controlflat, -1.5dB, -3dB, -6dB
- Power100-120V ~50/60 Hz or 220-240V ~50/60 Hz
- Cabinetvinyl-laminated, medium-density fiberboard
- Dimensions (WxDxH)9x12.2x13.2"
- Weight18.8 pounds (8.53 kg)
