null Skip to main content
DPA d:facto 4018VL Linear Supercardioid Microphone with SL1
DPA d:facto 4018VL Linear Supercardioid Microphone with SL1
$1,050.00

DPA d:facto 4018VL Linear Supercardioid Microphone with SL1

(No reviews yet)
SoundPro Item: 31814
MPN: 4018VL-B-SL1
  • Videos

  • DPA d:facto 4018VL Linear Supercardioid Microphone with SL1
$1,050.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The d:facto MMC4018VL Linear Supercardioid Microphone Capsule for Vocal from DPA features an isolation-optimized polar pattern and is designed to augment the human vocal range. It can be used to capture speech and vocals in sound reinforcement applications such as for stage, recordings, and more.

The capsule provides an applicable opening angle around the center axis comparable to a cardioid, which means that a pleasant tolerance around the center axis is obtained for the singer. In addition, the rear rejection is higher than other supercardioids, and the rear lobe opening is extremely uniform and controlled.

You can combine the d:facto MMC4018VL Linear Supercardioid Microphone Capsule with any of the d:facto adapters for wireless systems or the d:facto handle for wired use (sold separately).

DPA d:facto 4018VL Features

  • Extraordinarily natural sound
  • Perfectly uniform supercardioid directionality
  • High separation
  • Extreme SPL handling
  • Low handling noise
  • Sleek design
  • Flexible adapter system fits most professional wireless systems
  • 4018VL linear supercardioid microphone with SL11
  • Capsule grille1
  • SLI adapter1
  • Transducer TypeCondenser
  • Polar PatternSupercardioid
  • Frequency Response20 Hz - 20 kHz
  • Rated Output impedance100 ohms
  • Min Load Impedance1 kohms
  • Equivalent noise level, A-weightedtyp. 19 dB(A) re. 20 µPa (max. 21 dB(A)
  • Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
  • Dynamic rangetyp. 120 dB
  • Max SPL, THD 10%160 dB SPL peak
  • Cable drive capability328 ft (100 m)
  • Output balance principleimpedance balancing with active drive
  • Power supply (for full performance)P48 (phantom power)
  • Current consumptionmax 2.0mA
  • ConnectorXLR-3M. Pin 1 shield, Pin 2 signal + phase, Pin 3 - phase
  • Max output voltage, RMS8 V

In The Box

Videos Hide Videos Show Videos

Customer Reviews