Skip to main content
Decimator MD-QUAD V3 4-Channel MultiViewer
Decimator MD-QUAD V3 4-Channel MultiViewer

Decimator MD-QUAD V3 4-Channel MultiViewer

(No reviews yet)
SoundPro Item: 35214
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

1 to 4 Channel Multi-Viewer / Quad-Split with SDI and HDMI outputs for 3G/HD/SD and Custom Layouts.

Decimator MD-QUAD V3 Features

  • Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.
  • Professional 3G/HD/SD Test Pattern Generator featuring:
  • 26 Selectable Output Formats
  • 54 Test Patterns including Luma and Chroma Zone-plates
  • Audio Tone Generator
  • Horizontal and/or Vertical image flipping per window
  • Low cost miniature (3G/HD/SD)-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer
  • Custom Layouts with various standard layouts
  • 16 Character UMD overlay per window with individual enables, custom positioning and size
  • 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
    • Tallies can be applied to either Tally Boxes (Default) or Border
    • Tally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)
    • Load and restore Custom Layouts
    • Fast switching between inputs using Full-Screen scaling
    • Selectable output format in both Full-Screen and Multi-Viewer mode
    • Low latency buffering for each input allowing non-synchronous inputs
    • Linked (3G/HD/SD)-SDI and HDMI outputs
    • 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
  • Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
  • Variable aspect ratios per window
  • Pass-Through mode allowing any of the 4 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
  • An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection.
  • LEDs and a push button can then be used for status and control
  • USB port for control and updates
  • Locking DC Power Socket
  • 5 GPI on standard RJ-45 connector connector for Tallies and Remote Switching
  • RS422/485 is also include on the same RJ-45 connector for Dynamic UMD and Tallies via TSL protocol
  • MD-QUAD V3 4-channel multiviewer1
  • Power supply1
  • HDMI cable1
  • USB cable1
  • Mounting bracket1
  • SDI Formats
    • 3G: SMPTE 424M@2.97 and 2.967Gb/s
      • 1080p@60/59.94/50Hz
    • HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
      • 1080i@60/59.94/50Hz
      • 1080p/psf@30/29.97/25/24/23.98Hz
      • 720p@60/59.94/50/30/29.97/25/24/23.98Hz
    • SD:SMPTE 259M@270Mb/s
      • 625i50
      • 525i59.94
  • Inputs
    • Input Equalization > 100M using Belden 1694A
    • USB for control and updates
    • GPI on RJ-45
  • Outputs
    • 1 x 10-bit (3G/HD/SD)-SDI re-clocked
    • HDMI
  • Power
    • +5V to +24V DC, 6 Watts
    • Positive Centre Pin
  • LED Status
    • Power
    • 4 x Signal lock and rate
  • Menu Options
    • Input status for all 4 inputs
    • Output format
    • Output selection of Quad Split or input 1, 2, 3, or 4
    • Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
    • Individual aspect format for each input of Same as output, Letter-box or Pillar-box
    • Border Enable
    • Quad split mode reference of either Free-run or input 1
    • Enables for On-Screen Overlays
    • Basic Audio Meter control
  • Dimensions3.5" x 3.7" x 0.9"

In The Box

Customer Reviews