null Skip to main content
PreSonus CDL18s Dante-Enabled Active Subwoofer
[DISCONTINUED] PreSonus CDL18s Dante-Enabled Active Subwoofer

[DISCONTINUED] PreSonus CDL18s Dante-Enabled Active Subwoofer

(No reviews yet)
SoundPro Item: 35458
MPN: CDL18S
No Longer Available for Purchase
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The CDL18s subwoofer from PreSonus® is a terrific complement for any full-range loudspeaker and the perfect companion for the other members of PreSonus’ CDL speaker series. Every design decision was made so that the CDL18s packs serious punch into a small footprint. The CDL18s delivers a tight, coherent low-end punch, driven by an integrated 1000-watt Class D power amp, and features a unique ported design that maximizes efficiency in a compact form-factor.

The CDL speaker series provides myriad options and opportunities for both portable PA and installed sound applications. When flown together in a vertical array, or combined for ground-stacked applications, the CDL18s and CDL12 form a complete, coherent loudspeaker system with an even response across the frequency spectrum.

PreSonus CDL18s Features

  • Its single custom-8” low-frequency transducer with a 4-inch voice coil can travel 7mm before over excursion, and easily handles 800W
  • coil provides articulate low-end punch
  • Designed as the companion sub bass enclosure to the CDL12
  • full-range Constant Directivity Loudspeakers
  • Dante™ networking capability provides easy integration
  • into established audio networks
  • Integrated PDA-1000 amplifier provides 2000W of peak power
  • Remote-controlled Onboard DSP via WorxControl
  • Software for system optimization and speaker grouping
  • Integrated rigging hardware provides simple connection to other CDLseries enclosures and CDL Rigging Grid (sold separately)
  • CDL18s Dante-Enabled Active Subwoofer1
  • Acoustic Performance
    • Configuration: Active Subwoofer
    • Frequency Response (-3 dB): 42 Hz – 150 Hz (Variable)
    • Frequency Response (-10 dB): 36 Hz – 144 Hz
    • Maximum Peak SPL: 135 dB
    • Crossover Frequency: 90 Hz
  • Transducer
    • LF Transducer: 1x18" Ferrite magnet
    • Voice Coil Diameter: 4"
  • Amplifier
    • Type: Class D
    • Total Power Output: 2,000W Peak, 1,000W Program (500W RMS)
    • LF Power: 2,000W Peak, 1,000W Program (500W RMS)
    • Cooling: Free air convection
    • Rated THD: <0.05% (20 Hz - 20 kHz)
    • Dynamic Range: 119 dB (A-weighted)
    • Bandwidth: 20 Hz - 20 kHz
  • Connections and Controls
    • Input Channels: 1 Line
    • Input Connector Types: (XLR)
    • Line Input Impedance: 40 kΩ
    • Maximum Input: +4 dBu
    • Output Connector: 1 XLR, Direct out
    • Controls: Preset Select, Polarity Invert
    • Indicators : Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
  • DSP
    • Effects: Compression, Polarity Invert, Limiting, Delay, 8-band EQ and preset selection via WorxControl
    • Bit Depth: 24-bit
    • Sample Rate: 48 kHz
  • Enclosure
    • Material: 15 mm eucalyptus plywood
    • Finish Chemline™: Polyurea
    • Grille: Powder-coated steel
    • Dimensions (HxWxD): 23.2x20.8x24” (590x529x610 mm)
    • Unit Weight: 105 lbs (47.6 kg)
    • Handles: 2 (one on each side)
  • Safety
    • Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
    • Transducer Protection: Limiter
  • Power
    • AC Power Input: 90-260V~, 50-60 Hz
    • AC Power Consumption (1/8 Power): 4.2 amps
  • Suspension MountingRigging Points: M20 threaded pole receiver, integrated rigging (10:1 load)

In The Box

Videos Hide Videos Show Videos

Customer Reviews