Dynacord PowerMate 600-3 8-Channel Powered Mixer

The PowerMate incorporates no less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is of the highest quality as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.

The mixing section starts with 6 lowest noise, discrete microphone preamps. 3 auxiliary busses, one of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories.

The built in USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.

The 9 band stereo graphic equalizer allows precise tone control for speakers and room matching.

The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long-term power without giving up dynamics.

Finally, the slim housing is protected by a rugged plastic lid, hold by strong snap in magnets.

Dynacord PowerMate 600-3 Features

• Mixer with 8 input channels (4 Mic/Line + 2 Mic/Stereo-USB + 2 Stereo-Line)
• Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
• 2 High-Quality editable effects, 100 factory and 20 user presets
• Professional 4x4 24-bit / 96 kHz USB interface with MIDI

• PowerMate 600-3 8-channel powered mixer1
• Mains cord1
• Steinberg Cubase LE software1

• Channels (mono + stereo)4 + 4
• Microphone Inputs (XLR)6
• Auxilarys (MON, FX, AUX)1 Pre, 1 Post, 1 Pre/Post switchable
• Max. Single Channel Output Power, Dynamic Headroom, IHF-A
  • Into 2.66Ω: 2 x 1600W
  • Into 4Ω: 2 x 1250W
  • Into 8Ω: 2 x 675W
• Max. Single Channel Output Power, Continuous, 1kHz, THD=1%
  • Into 2.66Ω: 2 x 1350W
  • Into 4Ω: 2 x 1150W
  • Into 8Ω: 2 x 650W
• Max. Midband Output Power, 1kHz, THD=1%, Dual Channel
  • Into 2.66Ω: 2 x 1350W
  • Into 4Ω: 2 x 1000W
  • Into 8Ω: 2 x 600W
• Rated Output Power, 20Hz to 20kHz, THD<0.5%, Single Channel
  • Into 4Ω: 2 x 900W
  • Into 8Ω: 2 x 450W
• Max. Output Voltage, of Power Amplifier, 1kHz, No Load74 Vrms
• THD, at 1kHz, MBW=80kHz
  • Mic Input to Master A L/R Outputs, +16dBu, Typical: <0.005%
  • Power Amp Inputs to Speaker L/R Outputs: <0.075%
• DIM 30, Power Amplifier, 3.15kHz, 15kHz<0.05%
• IMD-SMPTE, Power Amplifier, 60Hz, 7kHz<0.15%
• Frequency Response, -3dB, ref. 1kHz
  • Any Input to Any Mixer Output: 15Hz to 70kHz
  • Any Input to Speaker L/R Output: 20Hz to 30kHz
• Crosstalk, 1kHz
  • Amplifier L/R: <-85dB
  • Channel to Channel: <-80dB
  • Mute and Standby Switch Attenuation: >100dB
  • Fader and FX/AUX/MON Send Attenuation: >85dB
• CMRR, Mic Input, 1kHz>80dB
• Input Sensitivity (all level controls in max. position)
  • Mic: -74 dBu (155 µV)
  • Line (mono): -54 dBu (1.55 mV)
  • Line (stereo): -34 dBu (15.5 mV)
  • CD (stereo): -34 dBu (15.5 mV)
  • Power Amp Inputs: +8 dBu (1.95 V)
• Max. Level, Mixing Desk
  • Mic Inputs: +11dBu
  • Mono Line Inputs: +31dBu
  • Stereo Line Inputs: +31dBu
  • All Other Inputs: +22dBu
  • All Other Outputs: +22dBu
• Input Impedances
  • Mic: 2kΩ
  • CD In: 10kΩ
  • All Other Inputs: > 15kΩ
• Output Impedances
  • Phones: 47Ω
  • All Other Outputs (balanced/unbalanced): 150Ω/75Ω
• EIN, Mic Input, A-weighted, 150Ω-130dBu
• Noise, Channel Inputs to Master A L/R Outputs, A-weighted
  • Master Fader Down: -100dBu
  • Master Fader 0dB, Channel Fader Down: -92dBu
  • Master Fader 0dB, Channel Fader 0dB, Channel Gain Unity: -82dBu
• Signal/Noise Ratio, Power Amplifier, A-weighted, 4Ω105dB
• Output Stage Topology, AmplifierClass D
• Equalization
  • Lo Shelving: ±15dB / 60Hz
  • Mid Peaking: ±12dB / 2.4kHz
  • Hi Shelving: ±15dB / 12kHz
  • Master EQ 9-Band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12k Hz): ±10dB/Q=1.5 to 2.5
• Filter
  • Lo-Cut, Mono Inputs: f=80Hz, 18dB/oct
  • Speaker Processing: LPN, switchable
• Effects
  • Type: 2 x Stereo 24/48-bit multi effects processors
  • Effects Presets: 100 factory + 20 user, tap-delay
  • Remote Control: footswitch, MIDI
• Display128 x 64 pixels, OLED
• Digital Audio Interface
  • Channels: 4 in / 4 out
  • AD/DA Conversion: 24-bit
  • Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
  • PC Interface: USB2.0, Female Type B
  • Peak Display: 6dB before clip
• MIDI Interface5-pin DIN connector, in/out
• Output Power Control (speaker protection)adjustable longterm RMS limiter
• Protection
  • Mixer Outputs (relay controlled): AUX, MON, MASTER A L/R
  • Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
  • Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
• Coolingcontinuous speed controlled fans
• Phantom Power (switchable in groups)48 V DC
• Power Requirements (SMPS with auto range mains input)100V to 240V AC, 50Hz to 60Hz
• Power Consumption450W (at 1/8 max. output power, 4Ω)
• Dimensions (WxHxD)17.28" x 6.37" x 14.27"
• Weight19.84 pounds