null Skip to main content
Dynacord TGX10 4-Channel 2500W DSP Power Amplifier
Dynacord TGX10 4-Channel 2500W DSP Power Amplifier
$10,379.00

Dynacord TGX10 4-Channel 2500W DSP Power Amplifier

(No reviews yet)
SoundPro Item: 37186
MPN: TGX10
$10,379.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

Dynacord TGX10 DSP power amplifier 4 x 2500W, live.

Dynacord TGX10 Features

  • 4-channel DSP amplifier for live applications
  • Power density of up to 10kW in 2RU
  • Fully integrated DSP with advanced 96 kHz processing and FIR Drive technology
  • OMNEO integration for seamless compatibility with Dante and OCA
  • Full color touch screen for control without software
  • TGX10 4-channel 2500W DSP power amplifier1
  • M6x20 screws4
  • Mains power connector1
  • Max. Output Power All Channels Driven
    • 2Ω: 2600W
    • 2.7Ω: 3000W
    • 4Ω: 2500W
    • 8Ω: 1250W
  • Max. Output Voltage150V peak
  • Max. Output Current53A peak
  • Amplifier
    • Voltage Gain ref.1 kHz: 32.0 dB, adjustable 24-40 dB
    • Input Sensitivity ref. to Max. Output Voltage: 10.7 dBu (2.66 V), adjustable 2.7-18.7 dBu
    • THD 3 dB below Max., AES17, 1 kHz: < 0.05 %
    • IMD-SMPTE, 60 Hz, 7 kHz: < 0.05 %
    • DIM100, 3.15 kHz, 15 kHz: < 0.15 %
    • Crosstalk ref. 1 kHz, 12 dB below Max., 8 Ω: < -80 dB
    • Frequency Response ref. 1 kHz, analog in to speaker out: 20 Hz to 20 kHz (ą0.5 dB)
    • Damping Factor, 20 Hz to 200 Hz, 8 Ω: > 400
    • Output Stage Topology: Class D, fixed frequency
    • Signal to Noise Ratio
      • A-Weighted, analog input: 112dB
      • A-Weighted, digital input: 115dB
    • Output Noise
      • A-Weighted, analog input: < -70 dBu
      • A-Weighted, digital input: < -73 dBu
  • Digital Signal Processing
    • Sampling Rate: 48 kHz/96 kHz, OMNEO/Dante synchronized
    • Signal Delay/Latency
      • Analog in to Speaker Out, 48 kHz/96 kHz: 0.70 ms/0.53 ms
      • AES3 in to Speaker Out, 48 kHz/96 kHz: 1.00 ms/0.66 ms
    • Dante Network Latency: typ. 1.00 ms
    • Signal Processing: 32/40 bit, floating point
    • User EQ: 12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass & Notch; 2 filters of them withadditional asymmetric filter type
    • User Delay: 0 to 2000 ms per channel (units: μs, ms, s, cm, m, inches, feet)
    • Array EQ: 5 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, & All-Pass
    • Array Delay: 0 to 500 ms per channel (units: μs, ms, s, cm, m, inches, feet)
    • Speaker EQ: 10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass, & All-Pass
    • Speaker X-Over: Hi-Pass & Lo-Pass per channel, 6/12/18/24/30/36/42/48 dB Bessel/Butterworth, 12/24/48 dB Linkwitz-Riley; Alignment Delay, 0 to 20 ms per channel
    • Speaker FIR: up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over
    • Speaker Limiters: Peak Anticipation Limiter & RMS/TEMP Limiter per channel
    • Other Functions: Source Selection & Mix, Level, Mute, Polarity, Sine & Noise Generator, Level Meters, Impedance Measurement, & Load Monitoring
    • Memory
      • DSP Presets: 1 Factory + 20 User
      • Speaker-Pool Presets: 30 speaker settings
      • Source Supervision & Fallback: AES3 Lock & OMNEO/Dante network supervision, switchover to alternative Source Selection
  • Connectivity
    • Analog Audio Input/Thru
      • Type: AES3 Lock & OMNEO/Dante network supervision, switchover to alternative Source Selection
      • Max. Input Level: +24 dBu
      • Input Impedance, active balanced: 20 kΩ
      • Reference level equal to digital input: +21 dBu for 0 dBFS
    • Digital Audio Input/Thru
      • Type: 2 x 3-pin XLR (alternative use of Analog In/Thru)
      • Format: AES3 (AES/EBU)
      • Input Sample Rates: 32 to 192 kHz, internal Sample-Rate-Converter
      • Thru Connector: active buffered, direct bypass if device is unpowered
    • Network
      • Type: 2 x Neutrik etherCON/RJ45, redundant PRIMARY/SECONDARY
      • Format: 1000base-T/100base-TX, integrated switch
      • Network Audio Inputs: 8 channels, 48/96 kHz, OMNEO/Dante format
      • Network Audio Outputs (Monitor): 2 channels, 48/96 kHz, OMNEO/Dante format
      • Front side Service Port: 1 x USB Type A
      • Mains Input: 1 x Neutrik powerCON-HC
      • Speaker Output: 4 x NL4
  • User Interface
    • Display: 320 x 240 pixel, 3.5" color TFT"
    • Front Panel Indicators: Full color LED illuminated ring
    • Front Panel Operating Elements: Rotary encoder, Capacitive Touch Screen
    • Rear Panel Indicators: 2 x LED (AES3 Input mode active, Amp-Find)
    • Rear Panel Operating Elements: mains switch
  • Power Requirements100 V to 240 V, 50 Hz to 60 Hz AC
  • Power Consumption
    • Rated Power Consumption: 1200 W
    • ⅛ Maximum Output Power at 4 Ω: 1765 W
    • Idle Mode (no input signal): 80 W
    • Standby Mode: < 18 W
  • Power Supply TopologySwitching Mode Power Supply with digital controlled Power Factor Correction
  • ProtectionsAudio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/ Under voltage Protection
  • CoolingFront-to-rear, temperature controlled fans, supervised
  • Ambient Temperature Limits40 °F to 105 °F (5 °C to 40 °C)
  • IEC Protection ClassClass I (grounded)
  • Electromagnetical EnvironmentE1, E2, E3
  • Dimensions (WxHxD)19.02" x 3.47" x 20.24"
  • Weight33 pounds

In The Box

Videos Hide Videos Show Videos

Customer Reviews