null Skip to main content
DPA 3506A d:dictate Omni Microphone Stereo Kit: 4006A microphones
DPA 3506A d:dictate Omni Microphone Stereo Kit

DPA 3506A d:dictate Omni Microphone Stereo Kit

(No reviews yet)
SoundPro Item: 38584
MPN: 3506A
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

d:dictate 3506A Stereo Kit with 4006A Omnidirectional is a complete stereo kit with two carefully factory-matched phantom powered omnidirectional condenser microphones.

Even though the standard tolerances on the d:dicate™ series are extremely low, a stereo match is even closer. These specially selected d:dicate 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity.

For reference stereo recording, there is no better choice than a d:dicate 4006A Microphone. These omnidirectional condenser microphones are linear and true in character. They come as a hand-matched pair that offers the truest capture of stereo sound available.

DPA 3506A Stereo Kit Features

  • Factory-matched pair within ±0.5 dB
  • Natural sound
  • High sensitivity
  • Low noise-floor
  • Extremely linear frequency
  • 4006A omnidirectional microphones2
  • Acoustic pressure equalizers6
  • Free-field grids2
  • Close-miking grids2
  • Diffuse-field grids2
  • Mic clips2
  • Nose cones2
  • Stereo boom1
  • Windscreens2
  • Holder2
  • Transducer TypeCondenser
  • Polar PatternOmnidirectional
  • Frequency Response10 Hz - 20 kHz
  • Rated Output Impedance200 ohms
  • Sensitivity, Nominal ±2 dB at 250 Hz40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent Noise Level, A-Weightedtyp. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • Equivalent Noise Level, ITU-R BS.468-4typ. 27 dB (max 29 dB)
  • Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
  • Dynamic Rangetyp. 124 dB
  • Max. SPL, THD 10%146 dB SPL peak
  • Switchable Attenuator, Filters, etc.0 dB / -20 dB
  • Cable Drive Capability100 m (328 ft)
  • Output Balance Principleimpedance balancing with Active Drive
  • CMRR> 60 dB
  • Power Supply (for full performance)P48 (Phantom Power)
  • Current Consumption2.8mA
  • ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Weight5.7 oz
  • Dimensions0.75" diameter x 6.7" length
  • Max. Output Voltage, RMS8 V
  • Matching Tolerance (frequency response and sensitivity)±0.5 dB
  • Phase Deviation for Kit< 5°

In The Box

Videos Hide Videos Show Videos

DPA 3506A d:dictate Omni Microphone Stereo Kit: 4006A microphones

Customer Reviews