d:dictate 3506A Stereo Kit with 4006A Omnidirectional is a complete stereo kit with two carefully factory-matched phantom powered omnidirectional condenser microphones.
Even though the standard tolerances on the d:dicate™ series are extremely low, a stereo match is even closer. These specially selected d:dicate 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity.
For reference stereo recording, there is no better choice than a d:dicate 4006A Microphone. These omnidirectional condenser microphones are linear and true in character. They come as a hand-matched pair that offers the truest capture of stereo sound available.
DPA 3506A Stereo Kit Features
- Factory-matched pair within ±0.5 dB
- Natural sound
- High sensitivity
- Low noise-floor
- Extremely linear frequency
- 4006A omnidirectional microphones2
- Acoustic pressure equalizers6
- Free-field grids2
- Close-miking grids2
- Diffuse-field grids2
- Mic clips2
- Nose cones2
- Stereo boom1
- Windscreens2
- Holder2
- Transducer TypeCondenser
- Polar PatternOmnidirectional
- Frequency Response10 Hz - 20 kHz
- Rated Output Impedance200 ohms
- Sensitivity, Nominal ±2 dB at 250 Hz40 mV/Pa; -28 dB re. 1 V/Pa
- Equivalent Noise Level, A-Weightedtyp. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4typ. 27 dB (max 29 dB)
- Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
- Dynamic Rangetyp. 124 dB
- Max. SPL, THD 10%146 dB SPL peak
- Switchable Attenuator, Filters, etc.0 dB / -20 dB
- Cable Drive Capability100 m (328 ft)
- Output Balance Principleimpedance balancing with Active Drive
- CMRR> 60 dB
- Power Supply (for full performance)P48 (Phantom Power)
- Current Consumption2.8mA
- ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Weight5.7 oz
- Dimensions0.75" diameter x 6.7" length
- Max. Output Voltage, RMS8 V
- Matching Tolerance (frequency response and sensitivity)±0.5 dB
- Phase Deviation for Kit< 5°
