This is a complete stereo kit with two d:dicate 4011A Cardioid Microphones, carefully factory-matched within ±1 dB on frequency response and sensitivity in the microphone’s entire frequency bandwidth.
The d:dicate 4011A Cardioid Microphone is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.
DPA 3511A Stereo Kit Features
- Close-miking
- Great for high sound levels
- Factory-matched pair within ±1 dB
- Accurate sound
- Colorless sound
- Modular flexibility
- 4011A microphones2
- Spacer1
- Windscreens2
- Stereo boom1
- Shock mount2
- Holder2
- Transducer TypeCondenser
- Polar PatternCardioid
- Frequency Response20 Hz - 20 kHz
- Rated Output Impedance200 ohms
- Sensitivity, Nominal ±2 dB at 1kHz10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent Noise Level, A-WeightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4Typ. 25 dB (max. 27 dB)
- Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
- Dynamic RangeTyp. 121 dB
- Max. SPL, THD 10%159 dB SPL peak
- Switchable Attenuator, Filters, etc.0 dB / -20 dB
- Cable Drive Capability100 m (328 ft)
- Output Balance PrincipleImpedance balancing with Active Drive
- CMRR> 60 dB
- Power Supply (for full performance)P48 (Phantom Power)
- Current Consumption2.8 mA
- ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Colormatte black
- Weight5.6 oz
- Dimensions0.75" diameter x 6.7" length
- Max. Output Voltage, RMS8 V
- Matching Tolerance (frequency response and sensitivity)±1 dB
- Phase Deviation for Kit< 10%
