Bodypack UHF wireless set featuring CL3 cardioid lavalier microphone for voice performance and presentations. The CL3 is a robust, general-purpose lavalier microphone. It is ideal for presentation and public speaking where its full and accurate sonic characteristics, coupled with its feedback-rejecting cardioid polar pattern deliver a clear and intelligible voice.
Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.
Electro-Voice RE3-BPCL System Features
- Wireless UHF bodypack set
- Cardioid lavalier mic for vocal applications
- Ideal for performance and public speaking
- CL3 Cardioid Lavalier Microphone1
- RE3-BPT Bodypack Transmitter1
- RE3-RX Diversity Receiver1
- Receiver antennas2
- Universal power supply1
- AA batteries2
- Receiver rack mounting hardware kit1
- Owner's manual1
- Documentation packet1
- Declaration of conformity1
- RE3-ACC-CL3 Lavalier
- Element type: Self-biased condenser
- Frequency response: 100 Hz - 15 kHz
- Polar pattern: Cardioid
- Sensitivity: open circuitvoltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA)
- Maximum SPL: 115 dB SPL
- Impedance: 3700 ohms
- Power requirements: 3-9 VDC
- Polarity
- Pin #1 - Ground, shield
- Pin #2 - Audio
- Pin #3 - Bias voltage
- Pin #4 - N/C
- Dimensions (cable length): 56.3" (1430 mm)
- Dimensions (head length): 1.04" (26.4 mm)
- Dimensions (head diameter): 0.4" (10.1 mm)
- Net weight: 0.758 oz (21.5 g)
- Shipping weight: 6.35 oz (180 g)
- Microphone connector: 4-pin mini plug
- Head finish: Non-reflecting black
- Material: Die cast aluminum, steel wire clothgrille, black flexible PVC cable
- RE3-BPT Bodypack
- Frequency oscillation mode: Phase-locked loop (PLL)
- Available band names, tuning bandwidths, and carrier frequency ranges
- 5L: 36 MHz (488-524 MHz)
- 5H: 36 MHz (560-596 MHz)
- 6M: 10 MHz (653-663 MHz)
- 8M: (823-865 MHz)*
- T: 3 MHz (803-806 MHz)
- *8M is split into two segments:
- 823-832MHz: 9MHz
- Sync frequency: Ultrasonic
- RF power output
- Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW
- 5H (560-596MHz): Low 10mW / High 50mW
- 6M (653-663MHz): Low 10mW / High 20mW
- 8M (823-865MHz) 10mW
- T (803-806MHz): Low 10mW / High 50mW
- Display by: LCD + LED
- Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock.
- RF stability: <±10kHz@Fc
- Modulation frequency shift: Wideband FM ±48kHz deviation
- Harmonic radiation: <−50dBc
- Input jack: 4-pin mini jack
- Battery: 2 x AA alkaline battery or NiMH rechargeable battery
- Charging contacts: Yes
- Finish: Black polyurethane paint
- Dimensions (without antenna)
- Height: 3.2 in. (81.5mm)
- Width: 2.54 in. (64.5mm)
- Depth: 0.98 in. (25mm)
- Net weight: 6.14 oz. (0.174 kg)
- Gross weight: 8.29 oz. (0.235 kg)
- RE3-RX Receiver
- Frequency Oscillation Mode: Phase-locked loop (PLL)
- Carrier Frequency Range: 470 - 865 MHz (tuning bandwidth is band-dependent)
- Sync Frequency: Ultrasonic 40 kHz
- Diversity: Antenna diversity
- Bandwidth: 36MHz
- Signal/Noise Ratio: >100dB(A)
- Total Harmonic Distortion (Thd): <0.6%@1kHz
- Receiving Sensitivity: -81dBm for -12dB SINAD
- Frequency Response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT)
- Antenna Type: Detachable ½ wave with BNC connector
- Antenna Booster Power: DC12 - 15V/100mA
- Function Display By: LCD
- Contents Of Display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator.
- Control Functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
- Sync Data Options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
- Audio Frequency Output Level: Ref：±22.5kHz Dev@1kHz Tone
- ¼” (6.3mm) Phone Jack：-10dBV
- XLR Jack：-4dBV(Line)、-24dBV(MIC)
- Audio Frequency Output Impedance: 240Ω (unbalanced) 1400Ω (balanced)
- Squelch and noise muting: Noise muting and tone code locking
- Output Ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack
- Power Supply: DC12~15V/500mA
- Finish: Black polyurethane paint
- Dimensions
- Width: 8.27 inch (210mm)
- Height: (with feet attached) 1.85 inch (47mm)
- Height: (without feet attached) 1.73 inch (44mm)
- Depth: (including antenna jack) 6.89 inch (175mm)
- Depth: (not including antenna jack) 6.1 inch (155mm)
- Net Weight: 2.71 lbs [1.23 kg]
- Gross Weight: 3.28 lbs [1.49 kg]
