The TwinPlex™ TL48 offers a tailored response with a mid-range rise that's ideal for speech and dialog applications, such as film and TV. Designed with leading audio professionals' input, the TL48 is easily concealed in a costume or directly against the skin under wardrobe, and offers extensive accessories to ensure quick, easy, and secure mounting-all with no impact on sound quality.
Shure TL48 Features
- With a paintable, fixed frequency cap and mid-band boost that accentuates dialog, the TL48 is ideal for film and TV applications
- Improved off-axis consistency, due to the patent pending dual-diaphragm design, yields accurate reproduction regardless of vocal source position or movement
- Best-in-class low self-noise and dynamic range for cleaner audio production
- Fixed frequency cap with internal hydrophobic woven lining resists sweat and moisture
- Paintable 1.6 mm cable that is immune to memory effect and kinks
- Dual redundant ground in cable serves as secondary shield for longevity
- Sound signature: Tailored for dialog (6dB mid-band boost at about 7kHz)
- Sensitivity: Low
- TL48 TwinPlex Subminiature Lavalier Microphone1
- RPM40STC Single Tie Clip 1
- RPM40TC Dual Tie Clip 1
- RPM40SO Standoff for Clips 1
- RPM40VM Vampire Mount 1
- RPM40SVM Sticky Vampire Mount 1
- RPM40WS Foam Windscreen 1
- RPM40SM Clear Sticky Mount 1
- RPM40TS Sticky Mount Adhesives15
- RPM40TS/50 Sticky Mount Adhesives50
- WA445 Neutrik Threaded Shell for WA430/WA435 1
- RPM40CASE Storage Case 1
- Transducer TypeCondenser
- Polar PatternOmnidirectional
- Frequency Response20 Hz - 20 kHz
- Sensitivity-45.0 dBV(5.62 mV)at 1 kHz[2]
- Self-Noise, A-Weighted, Equivalent Acoustic24.5 dB SPLA
- Signal-To-Noise Ratio[3]69.5 dB
- Output Clipping Level3.0 dBV,1 kHz at 1% THD, typical
- Maximum SPL142.0 dB SPL,1 kHz at 1% THD, typical
- Dynamic Range117.5 dB typical
- Microphone Current Draw120 to 240 µA, typical
- Bias Voltage (Recommended Operating Voltage)5 V DC
- Cable Diameter1.6 mm
- Cable Length
- MTQG, LEMO, MDOT 66 in. (1.67 m) NC, XLR connector 96 in. (2.43 m)
- Net Weight (with cable)0.42 oz (12g)
- Notes
- [1] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
- [2] 1 Pa=94 dB SPL
- [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
- [4] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
