Audix VX10 Vocal Condenser Microphone

The VX10 condenser vocal microphone was designed to set new performance standards for live sound and broadcast applications. With a uniformly controlled frequency response from 40 Hz - 20 kHz, the VX10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism. The VX10 condenser microphone will handle sound pressure levels of ≥138 dB and will provide over 20 dB of ambient noise rejection on live stages. Additionally, the VX10 vocal condenser microphone has a cardioid polar pattern which helps isolate vocals from other instruments on stage. This mic includes a 21 mm gold vapor capsule and a multi-stage internal pop filter.

The VX10 condenser mic is well balanced, comfortable to hold, durable, and designed with high standards and tight tolerances. The VX10 is manufactured with a precision die cast zinc alloy body, durable black E-coat finish and gold plated XLR connector.

The VX10 vocal condenser microphone is also available in a low output model (VX10 Lo) for greater control with loud stage volumes or extremely powerful vocalists.

The VX10 Vocal Condensor Microphone is great for:

• Live and studio
• Lead and backing vocals
• Speech
• Guitars
• Woodwinds, brasses
• Auxillary percussion, drum overheads, hi-hats
• Pianos
• On air announce mic
• Live broadcasts
• Excellent for use with in-ear monitors

Audix VX10 Features

• Elite condenser vocal mic with studio quality sound
• Reproduces vocals and speech with exceptional detail
• 21 mm gold sputtered diaphragm
• Ideal for broadcast and live recording
• Designed, assembled & tested in the USA

• VX10 Vocal Microphone1
• CASEWOOD Foam-lined wooden carrying case1
• MC1 Microphone Clip1
• P1 Carrying pouch1
• Three Year Warranty1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response40 Hz - 20 kHz
• Output Impedance250 ohms
• Sensitivity VX10 – 24 mV / Pa @ 1k VX10LO – 4 mV / Pa @ 1k
• Equivalent Noise Level 19 dB (A-weighted)
• Signal to Noise Ratio 75 dB
• Off Axis Rejection >20 dB
• Maximum SPL ≥138 dB (w/ -10 pad)
• Power Requirements 48-52 V
• Connector 3-pin XLRm
• Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Materials / Finish Zinc Alloy & Machined Brass / Black Finish
• Weight 310 g / 10.9 oz
• Length 180 mm / 7.1 in