null Skip to main content
Audix TM1 Plus Omni Condenser Measurement Microphone with Stand and Pop Screen
Audix TM1 Plus Omni Condenser Measurement Microphone

Audix TM1 Plus Omni Condenser Measurement Microphone

(No reviews yet)
SoundPro Item: 41618
MSRP: $359.00

Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The TM1PLUS from Audix is a combination kit which includes the TM1 measurement microphone, threaded acoustic windscreen, shock mount clip, ½ inch calibrator adaptor and microphone calibration data on CD.

The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications, known for its linearity, accurate response and consistency. Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 condenser microphone is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz-20 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts. Requiring 24-48 V phantom power for operation, the TM1 microphone features a precision machined four stage brass body and capsule housing, nickel plate finish, Switchcraft® or Audix XLR and shock absorbent O-ring.

The data files are a numeric representation of the TM1 frequency response. Use with a variety of popular software measurement systems to correct the response curve of the microphone. The TM1 is great for:

  • Test and measurement
  • Real time analyzers
  • Room analysis software programs
  • Ambient room miking

Audix TM1 Features

  • 6mm pre-polarized condenser capsule
  • Hi SPL response
  • Precision machined brass housings
  • Low noise electronics
  • Replaceable electronics and capsule
  • TM1 Test & Measurement Mic1
  • WSTM1 Windscreen1
  • SMT19 Shock Mount Clip1
  • TM1CA4231 Calibration Adaptor for Use With 1-inch Calibrators1
  • Sensitivity & Calibration Data CD1
  • Three Year Warranty1
  • Transducer TypePre-polarized Condenser
  • Frequency Response20 Hz – 20 kHz +/-2 dB
  • Polar PatternOmni
  • Output Impedance200 ohms
  • Sensitivity6 mV / Pa @ 1k
  • Equivalent Noise Level28 dB (A weighted)
  • Signal to Noise Ratio66 dB
  • Maximum SPL130 dB with distortion <1% 140 dB Max
  • Power Requirements24 – 48 V Phantom
  • Power Consumption8.9 mA @ 48 Volts
  • ConnectorSwitchcraft® or Audix mail XLR
  • PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Materials / Finish4 piece precision machined brass / Nickel Finish
  • Weight4.7 oz. (132 g) 
  • Length5.9 inches (150 mm) 

In The Box

Videos Hide Videos Show Videos

Customer Reviews