P3TRA215CL features SE215 Sound Isolating™ Earphones, all-metal components with optional receiver rechargeability, and more advanced receiver controls. PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.
Shure P3TRA215CL Features
- Send two channels of audio wirelessly to performers onstage
- 24-bit digital audio provides clear, detailed sound
- Patented Audio Reference Companding sounds more like wired
- Up to 90 dB signal-to-noise ratio
- Exceptionally wide stereo separation
- Solid analog RF connection over a 300 ft (90 m) range
- Create a personal mix from the bodypack with MixMode® technology or stereo mode
- Frequency scan and IR sync quickly finds and assigns a clean channel
- PSM300 Transmitter P3T1
- P3RA Wireless Bodypack Receiver1
- SE215 Sound Isolating™ Earphones1
- P3T
- RF Output Power: 10, 20, 30 mW
- Note: varies by region
- RF Output Impedance: 50 Ω (typical)
- Net Weight: 27.6 oz (783 g)
- Dimensions (H × W × D): 1.7 × 7.8 × 6.8 inches (43 × 198 × 172 mm)
- Power Requirements: 12–15 V DC, 260 mA maximum
- Audio Input
- Connector Type: 6.35 mm (1/4") TRS
- Polarity: Tip positive with respect to ring
- Configuration: Electronically balanced
- Impedance: 40 kΩ (actual)
- Nominal Input Level: Switchable, +4 dBu, -10 dBV
- Maximum Input Level: +4 dBu: +22 dBu -10 dBV: +12.2 dBu
- Pin Assignments: Tip=hot, Ring=cold, Sleeve=ground
- Phantom Power: Protection Up to 60 V DC
- Audio Output
- Connector Types: 6.35 mm (1/4") TRS
- Configuration: Electronically balanced
- Impedance: Connected directly to inputs
- RF Output Power: 10, 20, 30 mW
- P3RA
- Active RF Sensitivity (at 20 dB SINAD): 2.2 μV
- Image Rejection: >90 dB
- Adjacent Channel Rejection: >60 dB
- Intermodulation Attenuation: >50 dB
- Blocking: >60 dB
- Audio Output Power (1 kHz @ <1% distortion, peak power, @32 Ω): 80 mW (per output)
- Minimum Load Impedance: 16 Ω
- Headphone output: 3.5 mm (1.8") stereo
- Net Weight (with batteries): 6.9 oz (196 g)
- Dimensions (H × W × D): 99 × 66 × 23 mm
- Battery Life (continuous use)
- 4–5.5 hours, AA batteries
- 5.5–7 hours, SB900A battery
- SE215
- Transducer Type: Single High-Definition MicroDriver
- Sensitivity (at 1 kHz): 107 dB SPL/mW
- Impedance (at 1 kHz): 17 Ω
- Frequency Range: 22 Hz–17.5 kHz
- Net Weight: 1 oz (30 g)
