Electro-Voice EVID C12.2 12-Inch Ceiling Speaker

The Electro-Voice ® EVID C12.2 loudspeaker system is a high efficiency two-way ceiling loudspeaker package for high ceiling applications. The loudspeaker features the EVID 920-8B transducer, a 12" coaxial with high power handling and 100 dB sensitivity. The integrated 64W transformer allows for use in 70V/100V applications, and includes automatic saturation compensation. Transformer tap selection is via a convenient switch on the front baffle.

The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from heavy gauge steel, and is has a durable black powder-coat that blends in when used in open ceiling applications. The rear enclosure provides an optimum internal volume for extended lowfrequency performance.

The C12.2 can be suspended by an integrated 3/8" rigging point for use with threaded rod, or it can be mounted using the 3 pendant mount tabs on the rear enclosure. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin phoenix type connector that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C12.2 ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles.

Electro-Voice EVID C12.2 Features

• Full-range power for high ceilings, large spaces
• High sensitivity, high power-handling
• Integrated transformer with automatic saturation compensation for distortion free 70 V, 100 V, or 8 O use
• Front-panel mode/wattage selector
• White semi-gloss perforated grille
• Heavy-gauge steel enclosure in black
• 3/8-inch threaded-rod mount points for open ceilings
• Safe, easy installation with included tile bridge and mounting ring
• Complete package, requires no additional accessories

• EVID C12.2 12" 2-way coaxial ceiling speaker1
• Tile bridge1
• Backing plate support1
• Cutout template1
• Paint shield1

• Frequency Response (-3dB)85Hz - 18,000Hz
• Frequency Range (-10 dB)65Hz - 20,000Hz
• Axial Sensitivity100 dB (SPL 1W/1m)
• Max. Calculated SPL126 dB
• Power Handling
  • 8 Ω: 100W RMS
  • 70V: up to 64 W
  • 100V: up to 64 W
• Impedance8 Ω nominal (transformer bypass)
• Crossover Frequency2,000 Hz
• Rec. Highpass Frequency60 Hz
• Transducer920-8B, 12 in. high-efficiency coaxial driver
• Transformer Taps
  • 70V: 4, 8, 16, 32, or 64W with ASC
  • 100V: 8, 16, 32, or 64W with ASC
  • Bypass: 8 Ω nominal
• ConnectorsPhoenix type removable, with screw terminals and "loop-thru", accepts 12 AWG wire
• Enclosure Material
  • Backcan: powdercoated steel
  • Baffle/Bezel: UL 94V-O rated ABS
• Grilleperforated powder coated steel with safety tether
• Mounting System
  • Integrated 4-point toggle anchors
  • Integrated 3-point pendant mount
  • Integrated 3/8" threaded rod
  • Additional secondary mount
• Support Hardwaretile bridge, backing plate support, cutout template, paint shield
• Dimensions
  • Depth: 13.12"
  • Diameter: 16.31"
  • Cutout Diameter Size: 15.35"
• Weight29.3 pounds