The C562 CM from AKG is a professional boundary microphone for permanent installation in ceilings, walls, tables, and stages. Its flush-mountable design prevents comb filter effects or other interference that is a common problem when a microphone is positioned in close proximity to an acoustically-reflective surface. This means you can fearlessly install the C562 CM in a desk, table, wall, or ceiling, and makes it a great choice for incorporating into a permanent sound system for live recording or surveillance.
Low self-noise—high headroom. Boasting high sensitivity for a wide area of coverage, the C562 CM is characterized by excellent clarity and a consistent pickup anywhere around the mic. The mic has an approximately hemispherical polar pattern for enhanced speech intelligibility. When installed on a reflective surface such as a table or desk, the mic’s sensitivity is dB higher than that of a conventional omnidirectional microphone. A built-in omnidirectional pressure transducer renders the C 562 CM less susceptible to mechanical and wind noise than a cardioid boundary microphone.
The low-profile, cylindrical design of the C562 CM makes it easy to place in a range of environments without taking up too much room. It’s ideal for professional audio setups in businesses, such as board rooms, conference rooms, office spaces, and multi-use areas where you need a versatile miking solution. The installed result is inconspicuous: the included XLR phantom power adapter connecting to the mic cable via a miniature connector, rendering installation holes smaller than the diameter of the phantom power adapter and achieving a more “invisible” mounting solution.
Included in the box with the C562 CM Flush-Mount Boundary Microphone are a 20-inch (50cm) cable with mini jack plug, a phantom power adapter with XLR connector, and the mounting hardware necessary for permanent installation.
Please note: In order for the microphone to function properly, the microphone body should not make contact with any grounded metal parts. The C562 CM requires a phantom power source providing 9 to 52 V as per IEC 61938.
AKG C562 CM Features
- Hemispherical polar pattern for clear, intelligible pickup of speech
- High sensitivity for a great pickup area
- Low-profile cylindrical design, perfect for wall or tabletop installation
- C562 CM Flush-Mount Boundary Layer Microphone with mounting hardware (knurled nut) and fixed 20-in. (50-cm) cable with mini jack plug1
- Phantom power adapter with XLR connector and 20-in. (50-cm) cable with female mini jack plug1
- Transducer TypeCondenser
- Polar PatternOmnidirectional
- Frequency Response20 Hz - 20 kHz
- Recommended load impedance2000 ohms
- Sensitivity25 mV/Pa
- Equivalent noise level16 dB-A
- Signal to Noise78 dB-A
- Finishmatte nickel plated
- Powering Interface
- Voltage: 9 to 52 V
- Current: 2 mA
- Connector3-Pin XLRM
- Dimensions
- Length: 12 mm
- Height: 28 mm
- Diameter: 20 mm
- Net Weight30 g