A high power system capable of producing 136dB Peak SPL, the NEXO PS15-R2 Loudspeaker can be safely driven with up to 2000 Watts of amplifier power. Controlled by the new DTD Controller, the PS15-R2 achieves high SPLs and wide bandwidth performance, despite being only half the weight and volume of common trapezoidal loudspeaker systems. Must be used with a Nexo Controller (PS15 TD MkII analog or NX241 digital).
NEXO PS15 Features
- High-power system (136dB Peak SPL @ 1m) with 15in LF and 2in HF drivers
- Rotatable asymmetrical horn and unique cabinet architecture ensure versatility; user- adaptable for both PA and stage monitoring applications
- Two-way, switchable passive or active design for precise performance-matching to user requirements
- Sophisticated control electronics ensure reliable, linear operation
- PS15 passive speaker1
- Components
- LF: 1 x 15" 6 ohm driver
- HF: 1 x 2" throat, 3" titanium diaphragm, driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn
- Connectors3 x NL4MP SPEAKON 4 pole; Passive In Passive Loop Thru, Active In
- ConstructionBaltic Birch ply finished with textured, polyurethane black coating
- Fittings
- Handles: 2, integral to cabinet
- Front Finish: acoustic foam on perforated steel grille (77% transparent)
- Flying Points: 1 steel anchor point for flying track on top (9 positions), 2 steel anchor plates for flying track on bottom (3 positions)
- Stand Fittings: built in stand fitting, 35mm
- Fixed Installation: one set of 4 fixing points (omnimount 100 Std spacing)
- System Specifications (measured with PS15 TDController MKII)
- Frequency Response: 50 Hz - 18 kHz ±3dB (30 Hz - 19 kHz ±3dB with LS1200 Subwoofer)
- Usable Range @ -6dB: 47 Hz - 18 kHz (29 Hz - 18 kHz with LS1200 Subwoofer)
- Sensitivity 1W @1m: 102 dB SPL Nominal - 99 dB SPL Wideband
- Nominal Peak SPL @ 1m: 131 to 134 dB Peak (for 550 to 1200 W RMS Amp.)
- HF Dispersion: 50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions
- Directivity: 16 nominal (Q), 12dB nominal (DI)
- Crossover Frequencies: 900 Hz Passive or Active (internally switchable)
- Nominal Impedance: 8 ohms (passive), 6 ohms (LF), 8 ohms (HF)
- Recommended Amplifiers: 550 to 1200 Watts into 8 Ohms for 1 x PS15; 1000 to 1800 Watts into 4 Ohms for 2 x PS15 per channel
