[DISCONTINUED] QSC CX302V 2-Channel 250W 70V Power Amplifier

The CX Series is designed to meet the specialized needs of sound contractors. Eight 2-channel models have been designed from the ground up, combining the exclusive QSC PowerLight™ technology with specific features to meet the requirements of fixed installations.

With high-output power, versatile loading options, high thermal capacity and unmatched reliability, the CX Series is the perfect solution to any permanently installed sound system.

QSC CX302V Features

• 8 models to meet your exact power requirements
• Exclusive PowerLight switch-mode power supply technology for high performance and compact size
• Custom integrated security cover for tamper proof installations
• Variable speed fan for low noise
• 1 dB detented gain controls for fast and accurate gain settings
• Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
• XLR and detachable Euro style input connectors
• HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring
• Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
• Selectable high pass filters protect speakers and prevent speaker transformer saturation withminimal effect on program material (33 Hz or 75 Hz on non-V models, 50 Hz or 75 Hz on V models)
• Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
• Barrier strip output connector
• Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
• Class H complementary bipolar output circuitry for high efficiency (CX702, CX902, CX1102 & CX1202V)
• Optional external transformer accessory pack for isolated 70 and 100 -volt outputs (converts CX302 to 400 watts per channel isolated output)
• Compact size - all models are only 2 rack units high and 14" deep for reduced rack cost and floor space
• Light weight - all models weigh only 21 pounds (9.5 kg) for easier racking and shipping
• 3-year warranty plus optional 3-year extended service contract
• All CX Series amplifiers meet the European Union's, 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.

• CX302V 2-Channel 250W 70V Power Amplifier1
• Three Year Warranty (plus optional 3-year extended service contract)1

• POWER PER CHANNEL, STEREO MODE, Both Channels Driven
  • 8Ω, 20 Hz–20 kHz, 0.05% THD: 200 W
  • 4Ω, 20 Hz–20 kHz, 0.05% THD: 325 W
  • 2Ω, 1 kHz, 1% THD: 600 W
  • 70V, 20 Hz–20 kHz, 0.05% THD: 400 W with IT-42*
• POWER, BRIDGED MONO MODE
  • 16Ω, 20 Hz–20 kHz, 0.1% THD: 400 W
  • 8Ω, 20 Hz–20 kHz, 0.1% THD: 700 W
  • 4Ω, 1 kHz, 1% THD: 1200 W
  • Noise, 20 Hz–20 kHz: -107 dB
  • Input Sensitivity @ 8 ohms: 1.26 Vrms
  • Maximum Voltage Gain: 30 dB
  • Output Circuitry Class: AB+B
• Distortion (SMPTE-IM)Less than 0.02%
• Distortion (Typical) 20 Hz–20 kHz: 10 dB below rated power; 1.0 kHz and below: full rated power
  • Less than 0.01% THD
  • Less than 0.01% THD
• Frequency Response 20 Hz–20 kHz, ±0.2 dB
• Damping FactorGreater than 500
• Input Impedance6 kΩ unbalanced, 12 kΩ balanced
• Input Clipping10 V rms (+22 dBu)
• Cooling Variable-speed fan, rear-to-front air flow
• Connectors, each channel
  • Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
  • Output: Safety-shrouded barrier strip
• Amplifier Protection
  • Full short circuit, open circuit, thermal, ultrasonic, and RF protection.
  • Stable into reactive or mismatched loads.
  • Load ProtectionOn/off muting, DC-fault power supply shutdown
• Dimensions (HWD) inches3.5 x 19 x 14 / 2RU
• Dimensions (HWD) mm89 x 483 x 356 / 2RU
• Weight
  • 21 lbs (9.5 kg) net
  • 27 lbs (12.3 kg) shipping
• Notes* An isolation transformer (the IT-42) is available for the CX302, which converts its low-impedance outputs to isolated 400 W per channel constant-voltage outputs.