null Skip to main content
Radial SGI Set Guitar Interface System
Radial SGI Set Guitar Interface System

Radial SGI Set Guitar Interface System

(No reviews yet)
SoundPro Item: 47768
MSRP: $396.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The SGI is a high performance line driver system for guitars that takes an unbalanced instrument signal and allows you to drive it as far as 100 meters (300ft) without noise.

The SGI sends guitar signals across long distances without signal loss or noise, while retaining the original tone of the instrument. In the studio, it allows the guitarist to sit in the control room and connect to a distant guitar amp. On stage, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers. The SGI consists of two boxes: the SGI-TX transmitter and the SGI-RX receiver. The connection between the TX and RX is made using a standard balanced XLR microphone cable. To use, you simply plug your guitar into the SGI-TX input and connect your amp from the SGI-RX output and you are set to go. The SGI does all of the balancing, buffering and impedance matching for you.

Radial SGI Set Features

  • Balanced line driver for guitars and bass
  • Send signal over 100 meters (300 feet) without loss
  • 100% discrete class-A with Drag Control™
  • Delivers pure sound without artifact
  • SGI-TX transmitter1
  • SGI-RX receiver1
  • Three Year Warranty, transferable1
  • Audio circuit type Active 100% discrete class-A with transformer isolation
  • Frequency response 20Hz ~ 18kHz (-2dB)
  • Dynamic range 112dB
  • Total harmonic distortion 0.005% @ 1k
  • Intermodulation Distortion 0.04% @ 1k
  • Input Impedance Variable from 10k Ohms ~ 1 megaOhm
  • Output Impedance 4.5k Ohms (¼" unbalanced)
  • Noise -102dBu
  • Maximum Input +10dBu
  • Features Ground lift, Drag Control
  • Input Connectors TX:1/4" | RX:XLR
  • Output Connectors TX:XLR | RX:1/4"
  • Construction 14-gauge steel chassis & outer shell
  • Dimensions (L x W x D) 2.75 x 4.25 x 1.75 inches (70 x 108 x 44mm)
  • Weight 3 lbs. (1.36kg)
  • Shipping size (L x W x D) 5 x 2.75 x 10.75 inches (127 x 70 x 273mm)
  • Shipping weight 3.2 lbs (1.45kg)
  • Power +15VDC/400mA adapter included
  • Conditions For use in dry locations only between 5°C and 40°C

In The Box

Radial SGI Set Guitar Interface System

Customer Reviews