The MX410 surface mount version is a gooseneck microphone with a Bi-Color LED as status display. It has a 10" gooseneck and is suitable for boardrooms and other sites where aesthetics are important.
Shure MX410 Features
- Gooseneck length: 10 inch / 25.4 cm
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- RF filtering with CommShield™ technology
- Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
- MX410 10" gooseneck microphone1
- Wndscreen1
- Surface mount preamp1
- Fastening wing nut1
- Rubber isolation rings2
- 5-pin XLR female connector1
- Transducer TypeCondenser
- Polar PatternsCardioid (MX410/C), Supercardioid (MX410/S)
- Frequency Response50 Hz - 17 kHz
- Rated Output Impedance150 Ω (170 Ω actual)
- Output Configurationactive balanced
- Sensitivity (at 1kHz, open circuit voltage)
- Cardioid: -35 dBV/Pa (18mV)
- Supercardioid: -34dBV/Pa (21mV)
- Max. SPL (1kHz at 1% THD, 1kW load)
- Cardioid: 121 dB
- Supercardioid: 120 dB
- Dynamic Range (1kΩ load at 1kHz)93 dB
- Common Mode Rejection (10Hz to 100kHz)45 dB minimum
- Preamplifier Output Clipping Level (1% THD)-8 dBV (0.4 V)
- Logic Connections
- LED IN: active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V
- LOGIC OUT: active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ)
- Mute Switch Attenuation50 dB minimum
- Power Requirements48-52 VDC phantom, 8.0mA
- Weight0.15 pounds