[DISCONTINUED] Roland RUBIX44 USB Audio Interface

Rubix44 delivers the perfect balance of high-fidelity audio, rugged build quality, and essential features for today's musicians and producers. It serves up warm and clear high-resolution audio up to 24-bit/192 kHz and features four top-quality mic preamps carefully designed for pristine sound and low-noise performance. And with four discrete outputs, analog dynamics processing, and an integrated MIDI interface, you have the power and flexibility to support your growing musical ambitions. Rubix44 works seamlessly with Mac and Windows computers, and even supports the Apple iPad for the ultimate portable music production experience.

Roland RUBIX44 Features

• 4-in/4-out USB audio interface
• 4 low-noise mic preamps with XLR combo jacks
• Hardware compressor/limiter
• Hi-Z input for guitar and other high impedance sources
• MIDI In/Out ports
• Extensively shielded, low-noise design
• Sturdy and compact metal construction
• Big, easy-to-read indicators show vital information
• Sturdy and compact metal construction
• Ground lifts for quiet operation in a variety of venues

• RUBIX44 USB Audio Interface1
• Setup Guide1
• Leaflet "USING THE UNIT SAFELY"1
• Power cord1
• USB cable1
• Ableton Live Lite1

• System
  • Number of Audio Record/Playback Channels
    • Record: 4 channels
    • Playback: 4 channels
  • Signal Processing
    • PC interface: 24 bits
    • AD/DA conversion: 24 bits
  • Sampling Frequency: AD/DA conversion: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz</
  • Interface
    • Hi-Speed USB
    • MIDI IN, OUT
  • Connectors
    • Input (1L, 2R, 3L, 4R) connectors: XLR type (balanced, phantom power: +48 V, 6 mA Max *1)
    • INPUT (1L, 2R, 3L, 4R) jacks *2: 1/4-inch TRS phone type (balanced)
    • PHONES jack: Stereo 1/4-inch phone type
    • OUTPUT (1L, 2R, 3L, 4R) jacks: 1/4-inch TRS phone type (impedance balanced) MIDI (IN, OUT) connectors
    • USB port: USB Type B
    • DC IN jack
    • *1 Current value per channel.
    • *2 INPUT 1L, 3L support high impedance
  • Controllers
    • SENS 1L, 2R, 3L, 4R knobs
    • Hi-Z switches
    • 48V switches
    • THRS knobs
    • COMP/LIMIT switches
    • DIRECT MONITOR 1/2 knob
    • DIRECT MONITOR 3/4 knob
    • MONO switches
    • OUTPUT knob
    • PHONES knob
    • POWER switch
    • GROUND LIFT switch
    • PHONES SOURCE switch
    • LOOPBACK switch
    • COMP/LIMIT TYPE 1/2 switch
    • COMP/LIMIT TYPE 3/4 switch
  • Indicator
    • Level indicators (1L, 2R, 3L, 4R)
    • Level indicator (COMP/LIMIT)
    • POWER indicator
    • Hi-Z indicators
    • 48V indicators
    • COMP/LIMIT indicators
• Characteristics
  • Nominal Input Level
    • INPUT (1L, 2R, 3L, 4R) connectors (XLR type): -60-- -12 dBu
    • INPUT (1L, 2R, 3L, 4R) jacks (1/4-inch TRS phone type): -44--+4 dBu
  • Maximum Input Level
    • INPUT (1L, 2R, 3L, 4R) connectors (XLR type): +2 dBu
    • INPUT (1L, 2R, 3L, 4R) jacks (1/4-inch TRS phone type): +18 dBu
  • Nominal Output Level
    • OUTPUT (1L, 2R, 3L, 4R) jacks: -6 dBu (impedance balanced)
  • Maximum Output Level
    • OUTPUT (1L, 2R, 3L, 4R) jacks: +8 dBu (impedance balanced)
  • PHONES Maximum Output Power
    • 20 mW + 20 mW (L + R, 47 ohms load)
  • Headroom: 14 dB
  • Input Impedance
    • INPUT (1L, 2R, 3L, 4R) connectors (XLR type): 4 k ohms or greater (balanced)
    • INPUT (1L, 2R, 3L, 4R) jacks (1/4-inch TRS phone type): 15 k ohms or greater (balanced)
    • INPUT (1L, 3L) jacks (1/4-inch phone type): 500 k ohms or greater
    • *3 When the Hi-Z is turned on
    • Output Impedance
      • OUTPUT (1L, 2R, 3L, 4R) jacks: 2 k ohms (balanced)
      • PHONES jack: 47 ohms
    • Residual Noise Level: INPUT (1L, 2R) --> OUTPUT (1L, 2R): -94 dBu typ. (SENS 1L, SENS 2R knobs: min., input terminated with 600 ohms, IHF-A, typ.)
    • Dynamic Range
      • AD block INPUT (1L, 2R, 3L, 4R) jacks: 104 dB typ. (SENS 1L, SENS 2R knobs: min.)
      • DA block OUTPUT (1L, 2R, 3L, 4R) jacks: 109 dB typ.
• Power SupplyAC adaptor
• Operating System
  • Microsoft(R) Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10
  • Apple Mac OS X 10.10 or later
  • Apple iOS 9 or later
  • * Although Roland has tested numerous configurations, and has determined that on average, a computer system similar to that described above will permit normal operation of the Rubix, Roland cannot guarantee that a given computer can be used satisfactorily with the Rubix based solely on the fact that it meets the above requirements. This is because there are too many other variables that may influence the processing environment, including differences in motherboard design and the particular combination of other devices involved.
• Dimensions (WxDxH)12-1/4x6-1/2x1-13/16 inches (310x165x46mm)
• Weight (main unit only)4 lbs (1.8 kg)