Klipsch CA-800-T 8-Inch Surface Mount Install Speaker

Get classic Klispch sound for your deck or porch at home, or for your restaurant's outdoor seating area or patio bar. The CA-800T features multi-tap transformers for use with 70-volt or 100-volt distributed audio systems. Or you can set it to "bypass" mode and simply use these rugged, weather-resistant speakers with your standard home audio receiver or amplifier. Either way, you'll enjoy detailed sound and years of reliable operation.

Klipsch CA-800-T Features

• Paintable UV-resistant ABS enclosure with rustproof aluminum grille
• Very high sensitivity and power handling
• Built-in 60-watt 70V/100V multi-tap transformer with 8-ohm bypass
• 90 degree x 90 degree Tractrix Horn tweeter for clean clear highs
• Supplied with C-style mounting bracket and stainless steel hardware

• CA-800-T 8-Inch Surface Mount Install Speaker1
• C-style mounting bracket 1
• Set of stainless steel hardware1

• Frequency Response [1] 64-17.5kHz ± 4dB
• Power Handling [2]100W (21V)
• Max Continuous Output [3] 113dB
• Sensitivity (2.83V/1M)[4]96dB
• Horizontal Coverage90° ± 40 1.2kHz-20kHz
• Vertical Coverage90° ± 30 1kHz-20kHz
• DI 7 ± 2.5dB 700Hz-20kHz
• Q 5
• Nominal Impedance8 ohms (4.5 ohm min @167Hz)
• Crossover
  • 1.9kHz with 12dB/Octave high-pass
  • 12dB/Octave low-pass
• Transducers
  • One K-1183-A 8" woofer with IMG Cone
  • One K-150-A 1" titanium diaphragm compression driver
• Enclosure Venting Vented System via front firing ports
• Enclosure Material All-weather ABS plastic, paintable
• Input Connector4 position terminal strip
• Transformer Taps
  • 70V: 60W, 30W, 15W, 7.5W, 3.75W
  • 100V: 60W, 30W, 15W, 7.5W, 3.75W
  • Through Position: 8 ohms
• Height11.125" (28.26cm)
• Width 16.375" (41.53cm)
• Depth 12.31" (31.27cm)
• Weight18 lbs (8.16kg)
• Notes
  • [1] 3M, half space anechoic
  • [2] AES standard, continuous pink noise 50Hz-10Hz, 6dB peaks
  • [3] Calculated at IM at power handling power input
  • [4] SPL at 1M, half-space anechoic with 2.83V input