IK Multimedia iLoud MTM Studio Monitor

Note: Sold as a Single Unit.

IK Multimedia is excited to announce the newest addition to the iLoud family, iLoud MTM - nearfield studio monitors re-invented for quality, accuracy, and convenience. iLoud MTM takes the same inspiration behind iLoud Micro Monitors, to deliver reference-class sound in an ultra-compact format, and takes this concept even further to change everything about the sound, accuracy, and convenience of reference monitors in today's modern studio. iLoud MTM offers a totally DSP-controlled system to achieve results simply not possible with analog designs, and drawing on IK Multimedia's 20-year history of advanced digital signal processing. The results are impressive: 40Hz - 24kHz flat frequency response, size-defying bass response, true linear phase response for unbelievably revealing sound, superior imaging and precision even at close distances, built-in acoustic calibration derived from our award-winning ARC System software, and more. All this in a monitor that's compact enough to fit conveniently on a desk so you can use it anywhere. 

IK Multimedia iLoud MTM Features

• Note: Sold as a Single Unit
• Full DSP control
• MTM design for accurate sound focus and superior sound dispersion
• 2 x 3.5" high performance woofers + 1" back-chamber loaded tweeter
• 100W 2-way bi-amped speaker with class D amplifiers
• 103dB max SPL @1 m
• 40 Hz - 24 kHz frequency response
• Coherent phase response within +/- 15° from 200 Hz to 24 kHz
• ¼" / XLR Combo input, -10dBv or +4dBu selectable sensitivity
• EQ controls: LF extension, LF boost/cut, HF boost/cut
• Automatic environment calibration with included ARC™ measurement microphone
• Compact dimensions for easy positioning even in the smallest place
• Multiple positioning with included 20° tiltable isolation base, horizontal base, and built-in mic stand thread

• IK Multimedia iLoud MTM Studio Monitor1
• Power cord1
• ARC Microphone1
• ARC Microphone clamp1
• XLR to 1/8” (3.5mm) TS cable for ARC microphone (2.5m/8.2ft)1
• Tilting stand1
• Horizontal support feet set1
• Locking key1

• Type2-Way/3-speakers bi-amped, digitally controlled studio monitor
• LF Drivers 2 x 3.5” polypropylene custom made mid-woofers
• HF Driver 1” low distortion, back chambered silk dome tweeter
• Acoustic Design DSP tuned bass reflex
• Number of amps per speaker2
• Amplifiers typeHigh efficiency Class-D
• Total power100W RMS
• LF power70W RMS
• HF power 30W RMS
• Crossover Type Linear Phase Variable Order
• Crossover Frequency 3.1kHz
• Frequency response from 50 Hz to 24 kHz +/- 2dB (40 Hz -6dB when uncal, -3 dB when cal)
• Phase response System remains coherent within +/- 15° from 200Hz to 20kHz
• Sensitivity at +4dBu 0dBu signal generates a 100 dB SPL @ 1 m
• Sensitivity at -10dBV-11dBu signal generates a 100 dB SPL @ 1 m
• Maximum SPL @ 1m, one speaker playing, on axis103dB from 200Hz up sine wave, 95dB at 100Hz sine, 93dB pink noise
• Placement setup Manual switches for LF Extension, LF trim, HF trim, Desk position
• LF extension switchSets -3dB point of the frequency response at 40, 50, 60 or 80 Hz (LFE)
• LF switchLow shelf, +2dB or -3dB from 100Hz down
• HF switch high shelf, +2dB or -2dB from 8kHz up
• Desk switch -4dB at 160Hz and +1dB at 1.8kHz
• Calibration Fully automatic and built-in digital calibration, microphone included
• Measurement MicrophoneOmnidirectional, Mems based precision measurement microphone
• Connectors1x combo XLR-1/4” TRS balanced input; 1/8” TS ARC microphone input, 1 x USB type-B (service use only), AC POWER socket
• Power requirement90 to 240 V AC, auto-ranging, 50 or 60Hz, 120W max power consumption
• Size10.39x6.3x5.12" (264x160x130mm)
• Weight (per speaker)2,5kg/5.5lbs (speaker + foot)