Shure MVI Digital Audio Interface

Create a recording studio wherever and whenever you need it with the compact MOTIV MVI Digital Audio Interface from Shure. This ultra-portable digital audio interface boasts a combined XLR and 6.3mm input to connect a professional XLR microphone or 1/4" instrument output to a computer or mobile device (PC, Mac, or iOS) via a Lightning connector. When connected to a laptop/PC, the MVI also supplies the phantom power required to operate condenser microphones.

The unit has 5 preset DSP modes (speech, singing, flat, acoustic instrument, and loud) which configure for EQ, compression, and limiter settings so you can start recording immediately. The built-in touch panel also provides precision control over gain, mute, and headphone volume. If you want to fine-tune your recording for a specific purpose, you can adapt the limiter, compressor, and five-band EQ manually to find a unique sound. Adjust manual audio settings on iOS devices via the Lightning connector and using the included ShurePlus MOTIV app.

Boasting an all-metal construction, the MVI is designed to provide reliable performance, while its smaller build makes it easy to fit into any size setup. It features a built-in JFET Class A buffered instrument preamplifier input for exceptional tone and clarity. Included with the MVI Digital Audio Interface are a MicroB-to-USB Cable and a USB-C-to-MicroUSB Cable for easy connectivity options right out of the box.

More about Shure’s MOTIV App

The free ShurePlus MOTIV™ audio app effortlessly opens up tons of additional onscreen controls and exclusive features. Fast and simple to use, the MOTIV delivers the ability to record studio-caliber audio no matter where the opportunity—or inspiration—strikes. Personalize your mic gain, monitor mix, EQ, limiter, compressor, and more. Trim and share in multiple formats with a few quick taps.

Shure MVI Features

• 5 DSP preset modes (speech, singing, flat, acoustic instrument, loud) for EQ, compression, and limiter settings 
• Touch panel provides control for gain, mute, and headphone volume
• Manual audio settings can be adjusted via iOS devices with Lightning Connector, using the ShurePlus MOTIV app
• JFET Class A buffered instrument preamplifier input for exceptional tone and clarity
• Combined XLR microphone and 6.3 mm instrument input
• Supplies phantom power for use with condenser microphones

• MVI Digital Audio Interface1
• One meter USB Cable1
• One meter USB-C Cable1

• MFi Certified Yes
• Shure Incorporated 10/12
• DSP Modes (Presets) Speech/Singing/Acoustic/Loud/Flat
• Input Combination XLR and 6.35 mm (1/4") TRS
• Input Impedance 1/4 inch instrument input >1 MΩ
• Bit Depth 16-bit/24-bit
• Sampling Rate 44.1/48 kHz
• Frequency Response 20 Hz to 20,000 Hz (At Minimum Gain, Flat Mode)
• Adjustable Gain Range
  • 3-pin XLR 0 to +36 dB
  • 6.35 mm (1/4") TRS +9 dB
• Maximum Input Level
  • 3-pin XLR 0 dBV (At Minimum Gain, Flat Mode)
  • 6.35 mm (1/4") TRS +9 dBV (At Minimum Gain, Flat Mode)
• Headphone Output 3.5 mm (1/8″)
• Power Requirements Powered through USB or Lightning connector
• Phantom Power +48V USB/+12V iOS
• Mute Switch Attenuation Yes
• Housing All metal construction
• Net Weight 10.93 oz (310 g)
• Dimensions (H x W x D) 42 x 84 x 72 mm