iRig Acoustic Stage is a revolutionary new way to amplify your acoustic guitar for use live on stage. Just clip the ultra-compact microphone to your guitar and connect it to the belt pack, and enjoy a clear, uncolored sound like that of a professional microphone. 6 EQ settings and apersonal calibration ensure the best possible sound and instant feedback elimination make this an amazing new way to preserve the real tone of your instrument. Features high performance clip-on MEMS microphone and standalone digitalpreamp processor. Works with any acoustic guitar providing an exceptionally true acoustic tone AUX input to connect an existing guitar pickup system and blend it with the iRig Acoustic Stage signal. Includes blend and phase control. Onboard DSP provides personalized tone calibration and 4 selectable variations (natural, warm, bright and lo-cut). Includes a powerful feedback suppression system that will immediately eliminate feedback at the touch of a button. 32-bit A/D and D/A audio conversion provides professional quality audio with USB connection to Mac/PC and iOS.
IK Multimedia iRig Acoustic Stage Features
- Advanced MEMS microphone clips on to sound hole
- Preamp/DSP unit
- Dramatically improves your live acoustic sound
- ¼" AUX input with volume for piezo, magnetic pickups or other onboard electronics
- ¼" Output with level control for amplifier or PA system
- USB audio out for recording on a computer or mobile device
- Cancel Feedback with multiple frequency feedback cancelling
- 6 tone presets
- Personal instrument calibration
- Works on any acoustic, acoustic electric or ukulele with round sound hole
- Phase switch for optimizing dual source sound
- iRig Acoustic Stage Digital Microphone System1
- AA batteries2
- iRig Acoustic microphone1
- Belt clip1
- Pouch1
- Quick Start Guide1
- Registration Card1
- Common
- Microphone type: high performance MEMS element, soft rubber elastic enclosure
- Conversion: 32-bit A/D, 32-bit D/A
- Sampling Rate: 48 kHz
- Power: Battery powered (2xAA)
- Battery Life: approximately 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)
- Frequency response: 30 Hz to 20 kHz
- Signal to noise ratio: 101 dB(A)
- Microphone Input
- Connector: female 2,5mm TS Jack
- AUX Input
- Connector: unbalanced, TS 1/4” Jack. Tip: signal / Shield: ground
- AUX Input Impedance: 1MOhms
- LINE Output
- Connector: unbalanced, TS 1/4” Jack. Tip: signal / Shield: ground
- Line Output Impedance: 50Ohms (can drive long cables without any loss)
- Other I/O
- USB: 1x Micro-USB B type. USB class compliant audio output (48kHz/24bit)
