null Skip to main content
RME Fireface UFX II 60-Channel 192kHz USB Audio Interface
RME Fireface UFX II 60-Channel 192kHz USB Audio Interface
$2,599.00

RME Fireface UFX II 60-Channel 192kHz USB Audio Interface

(No reviews yet)
SoundPro Item: 59366
MPN: UFX2
MSRP: $2,699.00
$2,599.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The unique Fireface UFX II is the premier solution to transfer analog and digital audio data directly to a computer from practically any source.

Numerous unique features, well thought-out configuration dialogs, an industry-leading mixing engine and monitoring solution, professional DSP effects and class-leading analog circuits with latest digital converters put the Fireface UFX II at the very top of the range of computer-based audio interfaces.

RME Fireface UFX II Features

  • 12 x Analog I/O
  • 4 x XLR/TRS Mic/Inst/Line
  • 2 x Phones Output
  • 1 x AES/EBU I/O
  • 2 x ADAT I/O
  • 1 x Word Clock I/O
  • 2 x MIDI I/O
  • 1 x RME USB 2.0
  • TotalMix FX
  • ARC USB
  • DURec
  • Class Compliant Mode
  • DC-coupled Outputs
  • Fireface UFX II 60-Channel 192kHz USB Audio Interface1
  • Analog
    • AD, Line In 1-8, rear
      • Resolution AD: 24 bit
      • Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA
      • Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.8 kHz
      • Frequency response @ 96 kHz, -0.5 dB: 3 Hz – 45.8 kHz
      • Frequency response @ 192 kHz, -1 dB: 2 Hz – 92 kHz
      • THD: < -110 dB, < 0.00032 %
      • THD+N: < -104 dB, < 0.00063 %
      • Channel separation: > 110 dB
      • Maximum input level: +19 dBu
      • Input: 6.3 mm TRS jack, electronically balanced
      • Input impedance: 8 kOhm unbalanced, 12 kOhm balanced
      • Input sensitivity switchable to Lo Gain, +4 dBu
      • Input level for 0 dBFS @ Lo Gain: +19 dBu
      • Input level for 0 dBFS @ +4 dBu: +13 dBu
      • Variable gain: 0 to +12 dB
      • Minimum level for 0 dBFS: +1 dBu, -1.2 dBV
    • Microphone In 9-12, front (As AD, but:)
      • Input: XLR, electronically balanced
      • Input impedance: 3.4 kOhm
      • Signal to Noise ratio (SNR): 115 dB RMS unweighted, 118 dBA
      • Gain range: 75 dB
      • Maximum input level, Gain 0 dB: +18 dBu
      • Maximum input level, Gain 75 dB: -57 dBu
      • CLIP LED: 0 dBFS • SIG LED: -60 dBFS
    • Instrument In 9-12, front (As AD, but:)
      • Input: 6.3 mm TS jack, unbalanced
      • Input impedance: 1 MOhm
      • Signal to Noise ratio (SNR): 114 dB RMS unweighted, 118 dBA
      • Gain range: 42 dB
      • Maximum input level, Gain 8 dB: +21 dBu
      • Maximum input level, Gain 50 dB: -21 dBu
    • DA, Line Out 3-8, rear
      • Resolution: 24 bit
      • Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
      • Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 20.8 kHz
      • Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45 kHz
      • Frequency response @ 192 kHz, -1 dB: 5 Hz - 89 kHz
      • THD: < -110 dB, < 0.00032 %
      • THD+N: < -104 dB, < 0.00063 %
      • Channel separation: > 110 dB
      • Maximum output level: +19 dBu
      • Output: 6.3 mm TRS jack, servo-balanced
      • Output impedance: 75 Ohm unbalanced, 150 Ohm balanced
      • Output level switchable Hi Gain, +4 dBu, -10 dBV
      • Output level at 0 dBFS @ Hi Gain: +19 dBu
      • Output level at 0 dBFS @ +4 dBu: +13 dBu
      • Output level at 0 dBFS @ -10 dBV: +2 dBV
    • DA - Stereo Monitor Output XLR (1-2) As DA, but:
      • Output: XLR, balanced
      • Output level switchable 24 dBu, Hi Gain, +4 dBu, -10 dBV
      • Output level at 0 dBFS @ 24 dBu: +24 dBu
      • Output level at 0 dBFS @ Hi Gain: +19 dBu
      • Output level at 0 dBFS @ +4 dBu: +13 dBu
      • Output level at 0 dBFS @ -10 dBV: +2 dBV
    • DA - Stereo Monitor Output Phones (9-12) As DA, but:
      • Output: 2 x 6.3 mm TRS stereo jack, unbalanced
      • Maximum output level at 0 dBFS, High: +19 dBu
      • Maximum output level at 0 dBFS, Low: +2 dBV
      • Output impedance: 2 Ohm
      • Max power per channel @ 32 Ohm load, 0.1% THD: 210 mW (2.6 Vrms, +10.5 dBu)
  • MIDI
    • 2 x MIDI I/O via 5-pin DIN jacks
    • Galvanically isolated by optocoupled input
    • Hi-speed mode: Jitter and response time typically below 1 ms
    • Separate 128 byte FIFOs for input and output
  • Digital
    • Clocks: Internal, ADAT, AES, MADI, word clock
    • Low Jitter Design: < 1 ns in PLL mode, all inputs
    • Internal clock: 800 ps Jitter, Random Spread Spectrum
    • Jitter suppression of external clocks: > 30 dB (2.4 kHz)
    • Effective clock jitter influence on AD and DA conversion: near zero
    • PLL ensures zero dropout, even at more than 100 ns jitter
    • Digital Bitclock PLL for trouble-free varispeed ADAT operation
    • Supported sample rates: 28 kHz up to 200 kHz
  • Digital Inputs
    • AES/EBU
      • 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
      • High-sensitivity input stage (< 0.3 Vpp) • SPDIF compatible (IEC 60958)
      • Accepts Consumer and Professional format
      • Lock range: 27kHz–200kHz
      • Jitter when synced to input signal: < 1 ns li>Jitter suppression: > 30 dB (2.4 kHz)
    • ADAT Optical
      • 2 x TOSLINK, format according to Alesis specification
      • Standard: 2 x 8 channels 24 bit, up to 48 kHz
      • Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
      • Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
      • Bitclock PLL ensures perfect synchronisation even in varispeed operation
      • Lock range: 31.5 kHz – 50 kHz • Jitter when synced to input signal: < 1
    • SPDIF optical (ADAT2)
      • 1 x optical, according to IEC 60958
      • Accepts Consumer and Professional format
      • Lock range: 27 kHz – 200 kHz
      • Jitter when synced to input signal: < 1 ns
      • Jitter suppression: > 30 dB (2.4 kHz)
    • Word Clock
      • BNC
      • Internal termination 75 Ohm switchable
      • Automatic Double/Quad Speed detection and internal conversion to Single Speed
      • SteadyClock guarantees super low jitter synchronization even in varispeed operation
      • Not affected by DC-offsets within the network
      • Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
      • Overvoltage protection
      • Level range: 1.0 Vpp – 5.6 Vpp
      • Lock Range: 27kHz–200kHz
      • Jitter when synced to input signal: < 1 ns
      • Jitter suppression: > 30 dB (2.4 kHz)
  • Digital Outputs
    • AES/EBU
      • XLR, transformer-balanced, galvanically isolated, according to AES3-1992
      • Output level Professional 4.5 Vpp, Consumer 2.6 Vpp
      • Format Professional according to AES3-1992 Amendment 4
      • Format Consumer (SPDIF) according to IEC 60958
      • Single Wire mode, sample rate 28kHz up to 200kHz
    • ADAT
      • 2 x TOSLINK
      • Standard: 2 x 8 channels 24 bit, up to 48kHz
      • Double Speed (S/MUX): 2 x 4 channels 24 bit 96kHz
      • Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192kHz
    • SPDIF optical (ADAT2)
      • Format Consumer (SPDIF) according to IEC 60958
      • Sample rate 28kHz up to 200kHz
    • Word Clock
      • BNC
      • Max. output voltage: 5 Vpp
      • Output voltage @75Ohm termination: 4.0 Vpp
      • Output impedance: 10 Ohm
      • Frequency range: 27kHz–200kHz
  • Power supplyInternal switching PSU, 100 - 240 V AC, 36 Watts
  • Idle power consumption19W
  • Typical power consumption22-25 Watts
  • Dimensions including rack ears (WxHxD) 19x1.73x8.5" (483x44x210 mm)
  • Dimensions without rack ears (WxHxD) 17.3x1.73x8.3" (440x44x210 mm)
  • Total depth9.4” (240 mm)
  • Weight6.6 lbs (3 kg)
  • Temperature range+5° up to +50° Celsius (41° F up to 122°F)
  • Relative humidity< 75%, non-condensing

In The Box

Videos Hide Videos Show Videos

Customer Reviews