null Skip to main content
DPA ST2011C Stereo Pair with Case
DPA ST2011C Cardioid Condenser Microphones (Stereo Pair)
$2,050.00

DPA ST2011C Cardioid Condenser Microphones (Stereo Pair)

(No reviews yet)
SoundPro Item: 65312
MPN: ST2011C
$2,050.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

A complete stereo pair; two DPA ST2011C Cardioid Condenser Microphones, selected on sensitivity within ±1.5 dB. Makes several stereo principles like XY and ORTF easy to obtain.

The compact design and controlled directionality of these mics make them an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays.

These condenser microphones are acclaimed for its close-miking excellence and hi-SPL handling. Optimized for onstage use, it has been used on many stages as well as recording sessions. It exhibits a previously unheard blend of clarity, richness and dynamic range.

The off-axis response is linear but in a smaller frequency bandwidth. This makes stage separation and gain-to-feedback higher. The mic level is easier to control.

DPA ST2011C Features

  • Sensitivity-selected pair
  • Blends clarity, richness and dynamics
  • Twin diaphragm capsule and interference tube technologies
  • Superb stage separation and level control
  • Low-profile mounting options
  • Modular flexibility
  • Peli Case transportation and protection
  • 2011C twin diaphragm cardioid microphones2
  • Clips2
  • Windscreens2
  • Carry case1
  • Transducer TypeCondenser
  • Polar PatternCardioid
  • Frequency Response20 Hz - 20 kHz
  • Rated Output Impedance100 ohms
  • Sensitivity, Nominal ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent Noise Level, A-Weightedtyp. 20 dB(A) re. 20 µPa (max. 23 dB(A))
  • Equivalent Noise Level, ITU-R BS.468-4typ. 33 dB (max. 36 dB)
  • Distortion, THD < 1%134 dB SPL RMS, 137 dB SPL peak
  • Dynamic Rangetyp. 117 dB
  • Max. SPL, THD 10%146 dB SPL peak
  • Cable Drive Capability100 m (328 ft)
  • Output Balance PrincipleImpedance balancing with Active Drive
  • CMRR> 50 dB
  • Power Supply (for full performance)P48 (Phantom Power)
  • Current consumption2.8 mA
  • ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Colormatte black
  • Weight2.3 oz
  • Dimensions0.75" diameter x 3.6" length
  • Max. Output Voltage, RMS4.5 V
  • Sensitivity Selection Tolerance (at 1kHz)±1.5 dB

In The Box

Customer Reviews