null Skip to main content
DPA ST4015A Stereo Pair with Case
DPA ST4015A Wide Cardioid Condenser Microphones (Stereo Pair)
$3,940.00

DPA ST4015A Wide Cardioid Condenser Microphones (Stereo Pair)

(No reviews yet)
SoundPro Item: 65319
MPN: ST4015A
$3,940.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

A complete Stereo Pair with two carefully factory-matched d:dicate ST4015A Wide Cardioid Microphones. Even though the standard tolerances on d:dicate™ series are extremely low, a stereo match is even closer. These mics are matched within ±1 dB on both frequency response and sensitivity.

DPA's wide cardioid microphones are capable of handling extremely high sound pressure levels before clipping occurs. The d:dicate 4015A Wide Cardioid Microphone even includes a 20 dB pad switch in the center of the XLR connector to prevent overloading of the mic amplifier.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays.

DPA ST4015A Features

  • Low profile - wide pickup area
  • Natural reproduction
  • Directional ambience pickup
  • Carefully matched within ±1 dB
  • Peli Case transportation and protection
  • Modular flexibility
  • 4015A wide cardioid microphones2
  • Clips2
  • Windscreens2
  • Carry case1
  • Transducer TypeCondenser
  • Polar Patternwide cardioid
  • Frequency Response20 Hz - 20 kHz
  • Rated Output Impedance200 ohms
  • Sensitivity, Nominal ±2 dB at 1kHz10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent Noise Level, A-Weightedtyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
  • Equivalent Noise Level, ITU-R BS.468-4typ. 25 dB (max. 27 dB)
  • Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
  • Dynamic Rangetyp. 121 dB
  • Max. SPL, THD 10%159 dB SPL peak
  • Switchable Attenuator, Filters, etc.0 dB / -20 dB
  • Cable Drive Capability100 m (328 ft)
  • Output Balance PrincipleImpedance balancing with Active Drive
  • CMRR> 60 dB
  • Power Supply (for full performance)P48 (Phantom Power)
  • Current Consumption2.8 mA
  • ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Colormatte black
  • Weight5.6 oz
  • Dimensions0.75" diameter x 6.7" length
  • Max. Output Voltage, RMS8 V
  • Matching Tolerance (frequency response and sensitivity)±1 dB
  • Phase Deviation for Kit< 10°

In The Box

Customer Reviews