The semi horn loaded subwoofer DVA KS10 is equipped with a single 18" woofer driven by a Class-D Digipro@G3 power amp delivering 2000W Peak and reaching 134 dB SPL. Maximun versatility is granted by a stereo input/output balanced pre-amp. Crucially, KS10 can be used as a compact PA system (together with DVA K5 on a speaker pole) or groundstacked, but can also be flown thanks to the optionally available flyware. A dedicated encoder aloows to apply up to 4.5 ms of delay, with 0.5 ms speps. A switch allows to invert the phase by 180° as well as changing the LPF from 90 Hz to 120 Hz.
Use it in a compact PA system, on a pole, groundstacked or flown in a DVA K5 array, this active sub is the most versatile low-end bin of the DVA series.
dB Technologies DVA KS10 Features
- Powerful and quiet amplification with Digipro G3 Class D amplifier
- High-quality 18" woofer
- Fast and accurate DSP configuration using delay, phase and crossover controls
- Handles and mounting points ensure fast and versatile setup
- DVA KS10 subwoofer1
- Speaker typeactive semi-horn loaded flyable subwoofer
- Frequency response41-120Hz (-10dB)
- Max SPL134 dB
- Directivityomnidirectional
- LF18", 4" vc
- AmplifierDigipro® G3 Class D
- RMS power900W
- Peak power1800W
- Coolingconvection
- Power supply900W SMPS with auto range PSU
- ControllerDSP 56 bit
- AD/DA converter24bit / 48kHz
- Limiterdual active multiband RMS, peak, thermal
- Crossover frequency LF-HF90, 120 Hz (selectable)
- Slope LF-HF24dB/Octave
- Input selection2x XLR balanced
- Output selection2x XLR balanced
- Power socket1x PowerCon in + 1x PowerCon out
- Controls
- 1x input sensitivity rotary switch
- 1x DSP rotary (delay up to 4.5 ms on-board)
- 1x polarity inversion switch (0°-180°
- 1x x-over frequency switch (90Hz, 120Hz)
- 1x output mode switch (link- x-over)
- Housingmultiplex plywood
- Handles2 per side
- Rigging points2 pick points on top to fix DRK10/20 rigging frames
- Pole mount1 M20 on top
- Dimensions (WxHxD)20.27" x 25.19" x 28.34"
- Weight95.69 pounds (43.4 kg)
