The Shure DL4 DuraPlex Omni Subminiature Lavalier Microphone has been extensively tested to ensure an IP57 dust-resistant, waterproof rating. Whether shooting reality TV, mounting a professional theatrical tour, or wherever audio takes you, contending with the elements won’t slow you down. As comfortable on the beach as it is in a broadcast studio, DuraPlex features a neutral, full sound quality that lives up to the highest audio standards.
The advanced 1.6 mm Shure Plex cable, first introduced with the award-winning TwinPlex subminiature microphone, lasts longer than competing cables due to a dual redundant ground which doubles as a secondary shield. It also offers virtually zero “memory effect,” won’t kink, and is fully paintable.
Shure DL4 Features
- 5 mm omnidirectional subminiature design for discrete placement and improved gain-before-feedback
- IP57 dust-resistant, waterproof rated
- Neutral, full sound quality for film, broadcast, speech, theater, and performance applications
- Advanced 1.6 mm Shure Plex cable:
- Dual redundant ground in cable serves as secondary shield for unprecedented longevity
- Immune to memory effect and kinks
- Presence Cap included for tailored frequency response provides additional vocal clarity and presence (3-4 dB boost near 10 kHz)
- Available in two connector types: TA4F (mTQG) and LEMO
- DL4 DuraPlex Omni Subminiature Lavalier Microphone1
- Case1
- Foam Windscreen1
- Snap-fit Windscreen1
- Single Tie Clip1
- Sticky Mount1
- TQG Locking Collar (mTQG/TA4F SKUs only)1
- Microphone CapsuleMEMS
- Polar PatternOmnidirectional
- Frequency Response20 Hz - 20 kHz
- Sensitivity–42.5 dBV (7.5 mVRMS) @ 1 kHz
- Self-Noise31 dB SPL-A (A-weighted, Equivalent Acoustical)
- Signal-to-Noise Ratio63 dB
- Maximum SPL132.0 dB SPL (1 kHz @ 1% THD, typical)
- Dynamic Range101 dB (Typical)
- Microphone Current Draw220 µA, maximum
- Bias Voltage (Recommended Operating Voltage)5 VDC
- Cable Diameter1.6 mm
- Cable Length66 in (1.67 m)
- Net Weight15g (0.53 oz)
- Capsule Dimensions (L×D)14.5×5.2 mm
